I installed the new bios 2503 and found the perfect settings that makes every CPU 13th and 14th stable (obviously if they are already degraded you have to change the CPU). From the tests done with Cinebench and OCCT I found no problems and the scores...
Hi,I updated the bios to the latest version 2402, which contains the fix for microcode to 0x125 eTVB, too bad that my previous settings I had with bios 1801 now no longer work.I had these settings before, but after the update the machine is unstable:...
installed the new bios 2703 on Z790 Extreme and I have no problem, the temperatures are low.At the beginning I had problems with temperatures of +10 degrees on OS Windows in idle but I immediately found the problem was the LightingService.exe service...
[Vincio i have a asus 790-f can i still use your settings you posted i9 14900k]I missed this message. You can set these settings if they are all present
Small update to the initial settings that I recommended, I changed "Maximum CPU Core Temperature" from Auto to 105 degrees, now I limit the throttling and the performance has further increased.
I would say not bad for a 13900K, I attach the score scr...
I personally wouldn't use SVID Behavior during training, but would always leave it on AUTO. Because as mentioned, it handles the A/C load line values.
Best case: 0.01mOhmTypical (stock): 0.50mOhm for 13900k, 0.80mOhm for 12900kWorst case: (I could ...
I remain of my opinion, that is, if you respect the settings that I suggested you have no problems and the instability problem that you encounter is to be found in the ram. Considering that you have had other crash episodes, I would do two tests, the...
