©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

peyears · 10-22-2013

Hi Folks,Just setup a Maximus VI formula and everything works great except it won't reboot, hangs at q-code 98.Cold boots are no problem but if it installs an update that requires a reboot (and everything does) it just hangs at 98 until I power it of...

peyears · 10-26-2013

Chino wrote:The 4 Way Optimization isn't perfect. It works for some, and it doesn't for others. I'd recommend you to pull th CMOS battery but I know it's a hassle to do so because you have to remove the thermal armor and all that. So just reflash you...

peyears · 10-26-2013

HiVizMan wrote:So your system is stuck in that loop again? Or did your re-flash the bios and sort it out.Please do not 4 way optimize again  And maybe remove AIsuiteIII to prevent any temptation.Will re-flash the BIOS again and should be back to ...

peyears · 10-25-2013

OK, removed the mPCIE card and it made no difference, still stopped at q-code 98.I noticed there was a newer BIOS, it came with 0714 and 0804 was available so I installed that and problem solved.I've also found out the culprit, after rebooting happil...

peyears · 10-23-2013

HiVizMan wrote:It screams out mPCIE at the minute.Not really sure what else you can do, if as you say you have changed input devices have no other devices connected...That's what I was thinking as well, I'll rip out the mPCIE on the weekend and let y...

peyears · 10-22-2013

It's not overclocked it at all, one of the first things I tried after getting Windows installed was click on 4 way optimization in AI Suite, just to see how fast it would go, when it tried to reboot it hung so I had to cold boot it and it booted stra...

User Statistics

User Activity

Maximus VI Formula won't reboot q-code 98

Re: Maximus VI Formula won't reboot q-code 98

Re: Maximus VI Formula won't reboot q-code 98

Re: Maximus VI Formula won't reboot q-code 98

Re: Maximus VI Formula won't reboot q-code 98

Re: Maximus VI Formula won't reboot q-code 98