Hello all,I have Dark Hero motherboard and I have a question about Dynamic OC Switch.Which two profiles in the BIOS is Dynamic OC Switch switching?I am confused which profile I should configure. I assume one profile is for multi-core and one for sin...
Hi all,In the new 3801 Bios, curve optimizer is included in both Extreme Tweaker and Advanced (AMD) overclock.Do I need to set up both or I just need to set up one to use PBO and curve optimizer?If so, which one should I set up?Thanks,
Hi,Do you guys know when Asus will release a new BIOS for Dark Hero, not the 3501 beta?I have been using 3501 beta for a while and I noticed my system resets itself from time to time. It did not happen with the previous version (3401).I checked even...
Hi,Has anybody updated the 3501 beta BIOS for dark hero? Does anybody find any issue?I upgraded the 3501 beta BIOS. Then I reset the mobo to the previous stable settings.I then noticed:1. the usb mouse response is better.2. the curve optimizer seem...
Hi all,I just upgraded my bios to 3401 (Dark Hero mobo) and needed to re-tune the system from scratch again.I got a little improvement in the overall performance of my 5800x system.Please let me know if my numbers are reasonable or low.Thanks,GTDrago...
Silent Scone@ROG wrote:Hello,Use the one under Extreme Tweaker.Thank you for your advice.There are new features in the new bios but I am a bit confused.When I choose pre-set Extreme oc for water-cooler, it resets the DOCP profile.Which one should I u...
Silent Scone@ROG wrote:Hello,The fabric itself and it's behaviour will remain static between builds. System stability can change, however. Especially between AGESA builds, or if the condition of the overclock was marginal.Did you make note of memory ...
Godofmosquitoes wrote:I have a theory that there might be a slight instability with my RAM when running it at 1T. So I want to try and running it at 2T (which its specifications from G.Skill also rate it as), to see if that resolves the issue.There a...
I am using G.Skill F4-3600C16-16GTZN. I have overclocked to 4000MHz and the system is very stable.My set-up is:CPU: AMD 5800XRAM: G.Skill F4-3600C16-16GTZNTiming: 4000MHz, 16-16-16-36-52, 1TDRAM Vcc: 1.4VFclk is locked to Uclk at 2000MHz.
I noticed that your fclk is locked to your RAM. That may be the reason your system is not stable. You may try one thing.Unlock the fclk manually by lowering it to say 1600MHz see if your system is stable.If so, then I believe the problem is the clo...
