©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Sierra_Oscar · 08-12-2023

I'm just looking for some advice regarding using multiple M.2 slots on the Z690 Maximus Hero board. I am using a Intel 12900k.The board has three M.2 socketsM.2_1M.2_2M.2_3I have three NVMe drives that I want to use on the board. Two of the NVMe driv...

Sierra_Oscar · 03-06-2022

Hi all,I'm using a Maximus Hero Z690 board. I currently have two Samsung M.2 NVME's installed, both of which are being detected by the bios and Windows and are working without issue.I also have a OCZ Vertex 460 SSD installed in one of the SATA ports ...

Sierra_Oscar · 02-28-2022

Hi all, I'm having an issue with my new build that someone may be able to assist me with. * I recently put my new system together. I installed Windows 11, the installation went perfectly, Windows booted fine all day and I was able to install all of ...

Sierra_Oscar · 08-12-2023

Thanks for your feedback JohnAb. Good to hear that your GPU is still running at x16. I was reading some conflicting content online from people saying that if you have all three slots utilised it would result in the GPU reverting to x8.Nice setup btw!

Sierra_Oscar · 03-06-2022

Thanks MrAgapiGC. I have tried enabling CSM and no joy so far.I enabled CSM, deleted the keys in Secure Boot and loaded the default and then saved the changes. However, when I go back into the bios CSM is showing as disabled. Tried it a few times no...

Sierra_Oscar · 03-02-2022

RavenMaster wrote:Go into the BIOS and set all your RAM timings manually. Don't use XMP. Turn off AI-Optimiser, save your settings then reboot. If you're using 4 sticks of DDR5 RAM, you'll have to turn your RAM speed down to 4800mhz. If you're using ...

Sierra_Oscar · 03-01-2022

I've recently upgraded to 1003 and now every time the system powers up / restarts it posts in safe mode. I have to use boot override to boot into my Windows 11 installation. Boot up procedure takes 4 minutes before I get the safe post error. Blank sc...

Sierra_Oscar · 03-01-2022

The more trouble shooting I do, the more I believe this may not be a Secure Boot issue.When I start the system I can see that the bios is working away doing it's normal checks by monitoring the internal LED. However it appears that it's doing these c...

User Statistics

User Activity

Z690 Maximus Hero M.2 Drives

Motherboard not detecting SSD's

Windows 11 No Longer Booting Following Bios Update

Re: Z690 Maximus Hero M.2 Drives

Re: Motherboard not detecting SSD's

Re: Windows 11 No Longer Booting Following Bios Update

Re: 1003 Bios update Z690

Re: Windows 11 No Longer Booting Following Bios Update