Hi everyone. I keep getting QCode 64 and boot loop after I update to bios 0904. When I roll back to 0816 the machine boots fine. I have tried unplugging everything (USB devices etc.), reseating the RAM, trying one stick of RAM in each DIMM slot ((did...
Thanks Pauliesan. I had a suspicion it was the RAM in my initial post. I will try this before I decide if I RMA the board or not. Thank you once again.
Thanks for your reply, to start with, the memory kit is listed in the original post along with all my specs that happened to be attached/installed on the board when this happens. If you read on through all the posts, I go on to say I unplugged EVERYT...
Hi Vinni-Gee, just wanted to let you know a couple of things. You've done exactly what I have as well as you know. But first, the top NvME slot makes no difference. I moved mine down the bottom to the chipset controller slots. Also if you change the ...
Stock, no XMP enabled. Video would show nothing. Just a black screen. It doesn't even post with the updated bios.Given the pain I have to go through of getting the computer bios rollback feature I'd rather not install it again. I went through this se...
Good to know I am not the only one with this issue. For me though it hit Q Code 64 before rebooting which points to a USB device "apparently". So, I unplugged everything even went as far to remove my Audio card, left one stick of RAM in it, tried all...
