Hi allAlways when i turn on the PC, the pc shows the BIOS logo, and then, this sata controller stuff appears:is there a way to config this and just set the bios to bypass that, so it go to windows directly?Thanks!
Hi all. I recently got an AMD FX-8350 processor, just for overclock it in my ASUS Crosshair V Formula (non-z) mobo.I've been testing all day long many combinations of multipliers and VCORE, with almost no stability.I tried the recommendations of the ...
Hi all. I'm writing this post because i didn't find any post wich could gave me an answer to my "problem" with this RAM, and i know that this forum can help me out First, my PC Specs:- Motherboard Crosshair V Formula ROG- CPU AMD Phenom II X6 1100T ...
Hi.I have been using this mobo withouth problems, giving power using the 8 pin power connector (the one that 4 pin were covered by a plastic piece). But recently (lol) i discovered that there was another 4 pin power connector (the common ones and th...
Hi everyone!I'm kinda newt at OC, and i dont want to do something stupid to try to solve something that i know i can't do...Well... for upgrading my pc, about 2 days ago i bought the ASUS Crosshair V Formula mobo, and installed everything that i had ...
Hello all!Sorry for posting in this old thread, but something happened recently. I've been using the same pc and same configurations that i got working the last time:Asus Crosshair V Formula (Non - Z)FX-8350 @4800mhzRAM 2 x Kingston Hyperx Beast KHX...
HiVizMan wrote:Yes the voltage swing is normal. Your OC is quite respectable what you do not tell me is your temperatures when running the stress test.I think that if your ram will run at the DOCP setting that you should try that with the OC above.We...
Well.. after some hours i finally did a "10 min" stable Aida 64 full stress test with this config:Ai tuning Manual mode, with 23.5 multiplier, Vcore 1.45 and Ram set at 2133MHz with 1.6 volts and 11-13-13-30-46 T2 timings. All seems to work... BUT CP...
