I've been searching crazy in reference to these two questions and I'm hoping someone can help out a newbie with this board.#1: When I go to Start and click on Shut Down I'm expecting the entire computer to shut off. Meaning, no lights on inside, an...
Currently, this is my very first built at age 67. It's terrifying to say the least. But here we go. I currently have a Z590-e motherboard that I'm starting to work on. In this according to ASUS it has 4 M.2 drives. Wait 4 M.2 drives, yes, 4 M.2 ...
Okay I hope I do this right and I hope someone at least gives me some good answers as I can't find them anywhere in the book. I'm getting ready to do my first built at age 67. I just purchase a I9-10850K chip to put into a Z590-e motherboard inside...
All drivers are up to date including the BIOS/UEFI. Every time I plug in my external hard drive which is 3.0 I'm only getting 2.0 speed. Use the 3.0 ports on the back of my case, again only 2.0 speed. So what's the problem?I'm using a z390-e gamin...
Thank you Jiaszzz_ROG for your response. However, at this time I no longer require your help as I have solved the problem. What I did was this. I when in and reset the CMOS/BIOS. Then on the next reboot, I enabled everything that needed to be ena...
I too am having trouble getting back into my system. I turn on the computer's black screen after waiting for about 2 mins. PTT is disable, Secure Boot State is Other OS, and Secure Boot Mode is Customer, and Windows 11 Pro will not boot up. I've t...
Tomorrow I will be adding another fan to my system. It will be directly facing my PCH/Chipset. Have to do a little cable management in that area. But my case allows me to mount a 120mm where the hard drives go. So maybe I can lower that temp, whi...