A new release of the firmware "Version 1104" has arrived.It is the same thing ow 1103 but it doesn't cost anything to try :Firmware 1104 - 2025/02/21 For the RAM do you have tested to setup the timing manualy ?
What is your serial number KIT ?MY MOTHERBOARD : ProArt X870EBIOS : 0706RAM : CORSAIR 2x32gb - 6000Mhz - CL30 - ref.: CMH32GX5M2B6000Z30KPROCESSOR : Ryzen 9600XIf both sticks manage to launch at 6000 MHz with EXPO I or II, it's too strange that the m...
Instead of putting the second stick, replace the first stick that works with the second.Boot with this second stick and wait for it to boot with EXPO. If it starts, turn off your PC, put the 1st stick back in slot 1 (A2) and the second in slot 2 (B2)...
This solution has already been explained for many weeks on this post (page 10 at 12) and I don't understand why no one tries because it is the only way to make the motherboard learn each RAM one by one.It would be good to put this solution forward to...
If you have 4 stick of DDR5 (4x16gb) you can't activate EXPO with 64gb at 6000mhz, it's not supported at this speed. You need to adapt the speed.And please to give us the reference of you RAM.Do you have apply the method page 12 ?
