I recently picked up a Strix X370-F. It came with bios 4012 which is Pinnacle 1.0.0.2. Right now I am mostly just in the "make sure everything works" phase with a 1600. Are there any compelling reasons to go to 4207 or later on this board with Ze...
MOOMO wrote:Fixed lot problems using this driver but still getting cracking and popping thing unfortunately Thank you so muchIt may sound ridiculous, but when I had my B350-F what I had to do was open the Realtek Audio Console each startup and cli...
Installed the 2700X. Cleared CMOS and loaded optimized defaults.One thing that seems odd is that the board set SOC voltage to 1.056V for my ram at 2666MT/s. I figured it would set something lower than that, but it is also still somewhat unclear to...
Hate to bump this, but I picked up a 2700X but haven't installed it yet. Is there any difference to boost behavior on these Zen+ X skus between the different bioses? I thought I read for the -Pro boards that some versions of the bioses had non work...
Kernel Power 41 is just whenever there is an unexpected shutdown IIRC. I was wondering if it might show something more helpful like display driver crash or anything helpful.I had that combo and had three total incidents on 5008 (with 0 on 4207). ...
Are you on the latest chipset drivers from the motherboard page? I think those worked best for me.Try to look in Reliability Monitor or Event Viewer for errors or warnings around when these boots occurred.
