I have a lot of USB devices and am using up almost all of my ports. The Maximus X board has 1 USB port labeled BIOS and 1 labeled Keybot.Is there any downside to using these ports with normal devices or do they just provide additional functionality i...
I have a Maximus X Code board and noticed that it only has 1 USB 2.0 header, 1 USB 3.1 header and new to me, a USB 3.1 Gen 2 header.I currently don't have any USB 3.1 Gen 2 devices but I could use another 2.0 or 3.1 gen header. Are there any adapters...
I just built a new system with the Maximus X Code board and I'm always paranoid about temperature on new builds. I re-used my same case and fans and just upgraded the motherboard, CPU, memory and CPU cooler.I noticed that once in Windows, I woul...
Any codes listed on the board LED when it doesn't boot?When you say it doesn't POST, does it literally not power on or does it just not load past the initial BIOS screen? Does it just freeze or show any errors?
I'd still lean towards the power supply but if it shuts off and reboots, there's a number of things that could cause that. Software, drivers, memory, CPU, power supply, motherboard.If it shuts down and stays off until you turn it back on, almost cert...
As long as you've verified that your temps are good, it's almost certainly your power supply.It is fully shutting down or just rebooting? If it's rebooting, you might to troubleshoot further. A full shutdown, you're overheating or have a faulty power...
I have a Maximus X Code but was in a similar situation. I started with an air cooler on my 8700k but wasn't happy with the temps or the noise. I switched to AIO and all is well.It comes down more to your chassis/case than your motherboard. Most AIO c...
Have you tried updating your chipset drivers? I'm leaning towards either the Bluetooth module being faulty or the wrong drivers somehow got installed. I would upset the chipset servers, try to enable Bluetooth in Windows 10 and connect a device. M...
