 If our laptops had tighter seal around the CPU / GPU die, something what was flexible and bonded to the heatsink / GPU / CPU and air tight, the liquid metal would actually remain in place and not oxidise due to the air around it. But anyway at leas...

If you really want to read something look into Honeywell's next generation PCM. https://blog.caplinq.com/introducing-ptm6880-phase-change-material-engineered-to-eliminate-pump-out_10779/ This should help you understand that pump-out is still common t...

I can read and perhaps that is not what you meant to say but this is exactly what you stated   @cell64 wrote: Asus'es factory LM application is very bad PTM and all thermal pastes will eventually degrade or suffer the fate of pump out, this is alway...

What you are showing is not how it was applied at the factory and is generally what happens when the liquid metal pumps off the CPU/GPU die. 

I can't see the page, says access restricted but anyway if your screen is the dual resolution one mentioned here, You need to switch the display mode so it can do 4K but you will only be at 120Hz, not sure exactly but this will be an Armoury Crate o...