©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

geecee61 · 07-31-2023

I have 2 computers one with a Z490E and one with the Z490F, both running a i7 10700K, both with 32GB Vengeance Pro, the other day I swapped my Strix Gtx1080 into the board that housed my RTX3090 card to check it, it went through the Windows loading d...

geecee61 · 02-17-2021

Following on from my original issue which is now fixed thanks to the suggestion of Trinidad2SC of placing 4 synthetic washers on the backplate my LC 360 now running at idle temp of 25 degrees, which is wonderful, however the fix came with the issue ...

geecee61 · 02-13-2021

I just moved my Strix LC 360 over from my Z270F board where it runs without any issue, sadly on the Z490F board the moment I switch on the computer the fans ramp up and temps just continue to climb, I put it back into the Z270F and it again works fin...

geecee61 · 02-12-2021

I recently upgraded from a Strix Z270 to a Z490 F with an i7 10700K and a Rog 750 PSU, I put my Nvme in and all works ok except the Strix Soar sound card didn't show up, I have tried it in different PCIe slots and it sometimes works and shows in devi...

geecee61 · 09-30-2019

For some time now I have been experiencing a (what I can only assume to be) flashing insertion cursor that appears randomly around my monitor(see attached photos) it appears in different places around the monitor screen each time, this comes spasmodi...

geecee61 · 08-31-2023

Sorry just got back off my holidays, thank you for your reply, I had already cleared the CMOS, also I tried the current GTX1080 in this set up in both PCIE lanes and neither work although the graphic card lights up in both and the fans spin, I am not...

geecee61 · 02-15-2021

Trinidad2SC wrote:When you take the pump off the cpu did you take notice of your paste spread? I had an issue where the cpu block wasn't seating all the way and I saw temps like that. I just made sure the backplate and standoff were correct and it we...

geecee61 · 02-13-2021

Trinidad2SC wrote:When you take the pump off the cpu did you take notice of your paste spread? I had an issue where the cpu block wasn't seating all the way and I saw temps like that. I just made sure the backplate and standoff were correct and it we...

geecee61 · 10-03-2019

Yes it is not always there, it appears randomly around different parts of the screen, I use 144hz on the monitor usually, I switch to 60hz when duplicating the monitor with my QLED tv, I noticed this happens more(though not always) when I have YouTub...

geecee61 · 10-03-2019

Yes I now have the 387 build, I use a ASUS ROG SWIFT PG279Q 27' running at 2560 x 1440(native) @ 60hz with gsync, but even on my previous monitor(not using gsync) I still had the issue using 1920 x 1080(native), but I have just tried a different reso...

User Statistics

User Activity

Undetected GPU nightmare

New Asus Strix LC 360 liquid cooler problem

Strix LC 360 problem

Strix Soar sound card issue

Random appearing insertion cursor

Re: Undetected GPU nightmare

Re: Strix LC 360 problem

Re: Strix LC 360 problem

Re: Random appearing insertion cursor

Re: Random appearing insertion cursor