©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Capo99999 · 01-09-2018

x399 Extreme Threadripper 1950x won't post with more than 1 DIMM installed. Purchased 128GB of g.skill (f4-2933c16q2-128gfx) and all work in slot 1 solo but won't post if I try to install more than one (using the recommended slot order). Purchased t...

Capo99999 · 01-09-2018

thanks for help. makes senseJpArizona wrote:imo its a bad board, I had a board liek that, but I was only dealing with 32gb ram. It will only post with one stick, soon as I add more it wouldnt post but with 1 it was fine, so what I did I tried every s...

Capo99999 · 01-09-2018

is 0902 the latest bios? anything later that might recognize more ram?

Capo99999 · 01-09-2018

Tried a few of the other slots. modules only work in the 1 slot. Tried reseating the cpu twice. both times were difficult to get screw 1 started. this is a mess. I don;t know if it's the cpu, board, or ram. Raja@ASUS wrote:Out of interest, what happe...

Capo99999 · 01-09-2018

dang. wish I saw this before I built. have always used asus for intel, up to 5-6 builds now no problem. my first amd build and what a mess. nothing works (cpu socket screws?!) and/or is consistent reported error. shame on asus

Capo99999 · 01-09-2018

now I'm more confused, after more research, the ram is listed as QVL approved on g.skill website: https://www.gskill.com/en/product/f4-2933c16q2-128gfx

User Statistics

User Activity

x399 Extreme Threadripper 1950x won't post with more than 16GB installed

Re: x399 Extreme Threadripper 1950x won't post with more than 16GB installed

Re: Zenith Extreme Beta UEFI 0901

Re: x399 Extreme Threadripper 1950x won't post with more than 16GB installed

Re: CPU upgrade... Threadripper should be called Hair ripper

Re: x399 Extreme Threadripper 1950x won't post with more than 16GB installed