©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

dsmtoday · 12-21-2018

When trying to wake my system from sleep, the motherboard will get stuck on 55 or 01. After about 15 seconds, it will cycle through a bunch of numbers and some leds on the board may flash, but then it gets stuck on 55 or 01 again. The board gets hu...

dsmtoday · 12-22-2018

Peter_Radics wrote:What is your Gpu?I have an old AMD Radeon R9 280X, from XFX. This is a 4-year old card, but I'm using this machine to do engineering work mostly, not much gaming. Still works pretty well for most of the games I play.Unfortunately,...

dsmtoday · 12-22-2018

Just to make sure, I went into the BIOS and loaded the "optimized default" settings (basically turns off all my overclock). Same problem, with one change. Instead of showing 01 with the yellow memory failure LED, it alternately cycles to 03 with a ...

dsmtoday · 12-22-2018

Merkor wrote:If you have a Samsung NVMe drive, try uninstalling the Samsung driver as it causes problems with fast boot and waking up from sleep. Samsung or Microsoft have to fix this.Thanks for the info. I do have a Samsung NVMe, however, I don't h...

dsmtoday · 12-22-2018

geneo wrote:Do you have VRM spread spectrum enabled? I had those same symptoms until I disabled it in BIOS.Thanks for the tip, I did have it enabled, but unfortunately, disabling it didn't fix this issue. Still get a hung system with the Q-code indi...

dsmtoday · 01-23-2018

dsmtoday wrote:I have this exact problemJust a followup to say I "solved" this problem by RMA'ing the motherboard.

User Statistics

User Activity

Maximus X Hero does not come out of sleep properly

Re: Maximus X Hero does not come out of sleep properly

Re: Maximus X Hero does not come out of sleep properly

Re: Maximus X Hero does not come out of sleep properly

Re: Maximus X Hero does not come out of sleep properly

Re: Error Code 55 or CC - Blank Screen