I have an Formula X motherboard, with my D5 pump plugged into the W_Pump+ Header. I stupidly unplugged the molex power while it was drawing power from another PSU during a leak test, but I had my pc turned on running Heaven. I unplugged the molex, Gp...

Not a huge deal but it irks me. Im assuming its a motherboard issue but not sure.I have a EKWB D5 pump/res combo, have it set to run at I beilieve 40 % but the issue happens no matter what I set it to.I hooked it up to the W_Pump+ and have that on my...

I have my pwm D5 pump set to 50% in the bios, and I have my LiveDash on the Asus Formula X set to only monitor the pump RPM.I just happened to glance at it and noticed it said 15,000(ish)RPM, instead of the usual 2400ish.Ive only seen it happen once ...

I followed the first part of the guide for overclocking, setting cpu core to manual, cpu voltage to adaptive, sync all cores to 49, additional turbo boost to 1.3v and ac and dc load line to 0.01.So at idle, cpu Z states my core voltage is at 1.280, b...

Just got my system done with waterloop installed. And there is an annoying orange led shining through my clear 1080ti waterblock, which I believe is the Hdd led on the motherboard according to the manual. I would just put some tape over it, but it's ...