I've been playing Destiny 2 since its release in 2017, this game has got me hooked and is what I mostly play. I've logged over 11,000 hours of play time, most of that was with the HP Zr30w monitor. You can get power bonuses to make your character str...
Hello Anonymous22
I don't have the ROG 5s phone, but the current version of Armoury Crate is 5.7.9.0.
If you have Armoury Crate installed, click settings at the bottom left, then update center. Here, you can check for updates.
Hello pcgamersz
Some suggestions ...
1) In the bios, try setting the pcie link speed to Gen 4.
2) Try clearing the cmos.
3) Try updating the bios.
4) Try reseating the gpu.
Some questions...
1) Are you using a riser cable?
2) Are you using a pcie 3...
Hello everyone,
I have the ROG Harpe Ace Aim Lab edition mouse and just got the ROG Strix Scope II 96% wireless keyboard, both support the ROG Omni Receiver and I wanted to share how easy it is to upgrade. Here is a more detailed guide you can follo...
Good day ROG overclockers,I'd like to share my overclock with the ROG Strix Z690-F Gaming Wifi motherboard and the i7-12700KF cpu.Maximum temps look high in the 80's but these were spikes, it mainly ran in the 50'sc to 70's c.The IA Limit Reasons sho...
The Glorius G-Lube is for lubing keyboard switches, it's a grease rather than an oil.
Here are another two:
Amazon.com: All Purpose Full Synthetic Oil - Advanced Synthetic Lubricant for Clocks, Knives, and Tools - Made in The USA (2 Ounces) : Industr...
Hello
Try disconnecting all usb devices except the cable to your keyboard and the ROG Omni Receiver.
With only these two devices connected, try the update in Armoury Crate.
Hello Panda814
You could try putting a drop or two of compu-lube between the scroll wheel and the mode selector button (ROG Logo).
Amazon.com: Compu-Lube: 16.5 mL (.557 fl oz) Dropper Tip Bottle: Synthetic Oil to Safely Lubricate Electronics, Compute...
Ok sounds good.
Your memory part number shows 1.40v, so this is normal that it sets 1.40v when EXPO is enabled.
64GB 6000MT/s CL30 may need manual voltage tuning. It's not uncommon for high speed, high capacity, low latency memory kits to need manual...
