©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

kemicalchaos · 10-22-2018

Hi,I'm currently running a ch7 Hero x470 (wi fi) with 16GB Corsair Vengeance RAM CMU16GX4M2C3200C16 :https://www.corsair.com/uk/en/Memory-Size/vengeance-led-configurator/p/CMU16GX4M2C3200C16I have both sticks running in slots A2/B2 as specified by th...

kemicalchaos · 10-14-2019

theAlmightyEyeball wrote:I am running a 2700x with Flare X 3200 ram.After updating to the latest bios my system always shuts off on a restart.Back to 2304 for me.Same here,Using Bios 2304 on a CH7 and a 2700X. Have tried latest bios 2801 and on a col...

kemicalchaos · 03-04-2019

I find that Asus Aura slows the system down by quite a lot. I set the moBo colour using Aura and then uninstall it.I then just use the G-Skill software for the RAM which doesn't have quite the same performance hit.Try benching using something quick l...

kemicalchaos · 02-05-2019

I had exactly the same issue although my issue was from new.It wasn't until I read a thread here that I discovered it's a fault with the slots and the only cure is to replace or RMA the board.I got a replacement board and bingo my G-skill RAM ran as ...

kemicalchaos · 12-05-2018

Hi Gupsterg.The solution to my issue turned out to be a new board.You may or may not have noticed the thread about the A2 slot being dodgy well his symptoms exactly matched mine. Fitted it today and the G- skill run as it should straight away.Many th...

kemicalchaos · 12-05-2018

The new C7H turned up today. I popped the G-Skill ram in the B2-A2 slots and ta da!! Runs lovely under docp too.So the slot in my old board is dodgy after all and i'm extremely pleased to have found your thread with a solution.Once again Many thanks!

User Statistics

User Activity

F9 and 0d Q-code seen with new RAM

Re: Latest C7H BIOS

Re: Crosshair VII - RGB ??

Re: C7H Error code "F9" when 2 RAM slots used

Re: F9 and 0d Q-code seen with new RAM

Re: CH7 A2 DIMM Slot Issues