©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

pndiode · 11-24-2022

Insure you download MSI Afterburner from a legit site.Fake MSI Afterburner Sites Inject Coin-Miner Into Software installerhttps://www.guru3d.com/news-story/fake-msi-afterburner-sites-inject-coin-miner-into-software-installer.htmlhttps://blog.cyble.co...

pndiode · 02-22-2023

Nope!Have patience. Everyone realizes you are the only one whom has done an RMA. Give ASUS Company at least 15 to 20 days after receiving your RMA. ASUS Company is constipated like many other companies (post-Covid-19 ERA).ASUS Z690 Hero backward capa...

pndiode · 02-12-2023

Might be a GPU alignment issue since M.2_1 is not being used. I could be wrong! Just a guess.Horizontal alignment: Try slight pressure on back of GPU toward motherboard and boot computer while maintaining slight pressure. That slight lift starts migr...

pndiode · 02-09-2023

Are we talking to a 12900K or 13900K? Let me check!You can try reinstalling or updating the Intel Chipset drivers.

pndiode · 02-08-2023

Armoury Crate somewhat works with ASUS products. If one wanted a dashboard, they could have installed AI Suite. All the bloatware is not required for RGB control.Amoury Crate somewhat works with ASUS products. If one wanted to control 5V RGB or 12V R...

pndiode · 01-29-2023

Ensure you do not have an extra motherboard standoff screw when you install the z790 Apex. The Z790 Apex has 9 standoff screws. The Z790I Edge only has 4 standoff screws.PSU clicks endlessly and the pc does not boot. PSU overload protection circuit i...

User Statistics

User Activity

For those that use MSI Afterburner

is there any way to expedite the process?

GPU Only Running at x8 instead of x16

strange stutter every couple of seconds

Never used iCUE but:

Z790 Apex broken?