©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

1stfisch · 04-13-2014

Hi,I am running a stable overclock of 4.6GHz but need voltage @ 1.41v to do it. As you can see from by build specs I am running a custom water cooling setup. I have re-applied thermal paste a few times but no improvement.CPU temps are low 30's at i...

1stfisch · 04-13-2014

I will definitely try your suggestion on other settings. I am currently set for fixed voltage. I will try adaptive as my first step. I've been running these settings for around three months now with no obvious ill effects but, as you say, who know...

1stfisch · 04-13-2014

I will definitely try your suggestion on other settings. I am currently set for fixed voltage. I will try adaptive as my first step. I've been running these settings for around three months now with no obvious ill effects but, as you say, who know...

1stfisch · 04-13-2014

Yes, I've got all the air out of my loop. I have one 360 and one 240 radiator with fans blowing out plus five more drawing air into the case. Lots of airflow...When I set to stock bios the CPU runs maybe 50 under load so I think most of my heat pr...

1stfisch · 04-13-2014

I've tried the dot method and tried smoothing it out with a thin piece of plastic from edge to edge (only enough for coverage with no excess). Same results for temps either way...Thanks for responding!

User Statistics

User Activity

High CPU Voltage Question

Re: High CPU Voltage Question

Re: High CPU Voltage Question

Re: High CPU Voltage Question

Re: High CPU Voltage Question