©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Latin · 04-28-2015

Good morning,I have the Formula VI motherboard that has been running fine for the past 14 months till this morning when I woke up to the PC in a no power condition.I can press the power button on the motherboard and still no start up. The Power and R...

Latin · 04-29-2015

Very well.I would like to thank both of you for taking your time to answer my questions. If there is anything I can do in-forum to +1 you guys let me know.

Latin · 04-29-2015

Just the power and reset lights are solid as well as the republic of gamers light is 'breathing'.Nothing on the little screen | Only when it attempts the half second boot-up.

Latin · 04-29-2015

NemesisChild wrote:The Corsair GS600 has 1 x 8 Pin EPS/ATX12V CPU.Not sure why you mentioned that it only has a 4-pin CPU connector.To boot and perform properly, the Formula VI only requires an 8-pin connection. The extra 4-pin is recommended for add...

Latin · 04-29-2015

I tested the motherboard with a spare Corsair 600gs with a 4pin epsv12 connector and not the 8pin (previous PSU had both 4 and 8 pin connected)With this PSU all of the light in the motherboard light up including the republic of gamers logo that's dea...

Latin · 04-28-2015

Nate152 wrote:Hello Latin and welcomeif you are not getting a code on the motherboard either the psu or the motherboard is faulty. I'm not sure how well I trust the paper clip test on your psu.I can agree with you on not trusting the PSU with the pa...

User Statistics

User Activity

Maximum VI Formula | No boot/Post

Re: Maximum VI Formula | No boot/Post

Re: Maximum VI Formula | No boot/Post

Re: Maximum VI Formula | No boot/Post

Re: Maximum VI Formula | No boot/Post

Re: Maximum VI Formula | No boot/Post