Hi, i ran into the problem that, whatever i did, i wasnt able to update my ME-Firmware. I got an Message: Warning! Please check mei driver is installed The thing is, my MEI Driver is installed and up-to-date... but it didnt work! The solution was ver...

Hi,is there a way to turn the green LAN-LED off when the PC is off?I know i can do that with "ErP-Ready: S4+S5" in the Bios - when i set this, LAN-LED is off...But i dont want that...What i did:Bios:Power on PCI-e: disabled (so Wake-on-Lan is disable...

Hi,when i look in my Bios, my VCCIO Mem OC is 1,152V (which is what i set there).So far, so good.But any software like Aida64 or HWiNFO shows me a VCCIO Mem OC of 0,576V (which is exact the half of the correct value).Is here anybody with a PRIME-A Z5...

Hi,which is the right Audio-Driver for my Z590-Prime-A Board?I find 2 threads here in the forum, but i have no idear which one is the right one and which driver i should use...Thanks!

Hi,i want to run 2 nvme-SSDs on my Prime-A Z590.1 PCIe 4.0 4x in Slot M2_11 PCIe 3.0 4x in Slot M2_3NO SATA-Drives!I disable all SATA-Ports in the Bios.Do i still need the AHCI-Driver or is this for SATA only?Thanks!