©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

billy_dexd · 07-07-2012

Hi,I have a Crosshair V Formula and a Phenom II X4 970BE. I was able to OC from the stock freq., 3.5GHz, to 3.91Ghz by just messing with the multiplier and the CPU Voltage. I have a multiplier set at 19.5x and the voltage set at 1.465. My max temp un...

billy_dexd · 07-19-2012

speed wrote:That is still a nice clock. for the PII x4. go with the 8150 or a 6core PII they both clock better and have better ram controller Yes, as of now, I'm still going fine with gaming and every uses. Let's wait till Pile Driver comes out and ...

billy_dexd · 07-18-2012

Hello everyone. I tried to use only a 2 x 2GB Potrait Matrix memory kit. Still, I got no luck. I couldn't get it to 4 Ghz even with the Vcore @1.5v, and the NB Freq was at 2600 Mhz, 1.4v. I think this is the limit of my chip, so guess I will have to ...

billy_dexd · 07-11-2012

Thank you for your help everyone. I'm now running at stock frequency because it is above 80'c during the day in Orange County, CA, soI don't want to warm up my room any further. I will let you know when I get a chance to OC again.Best wish.

billy_dexd · 07-08-2012

Thank you for your suggestions. I will try to use only one kit first before I decide to buy another kit. And, just wanna make sure, I don't have to mess around with the CPU or CPU-NB Load Line Calibration and the CPU Over Current Protection, right?

User Statistics

User Activity

Overclocking on Crosshair V Formula

Re: Overclocking on Crosshair V Formula

Re: Overclocking on Crosshair V Formula

Re: Overclocking on Crosshair V Formula

Re: Overclocking on Crosshair V Formula