Question:How does one control this?On the M6E I assume you would use the VCCIN Shadow Voltage option, but you know what they say about assuming things.Is this correct or is it another setting.All these voltages are confusing this newbie.
Meankeys is giving you good advice.Give RB a whirl, it does a good job.When I started down this road a few weeks back, I used IETU to test stability. (Intel Extreme Tuning Utility)One night I thought I had a good OC and let IETU run its stress test o...
You are not alone GreggMack.I have had this exact issue myself on a M6E board.Three different flash drives, a Transcend 4GB drive, an old Lexar 1GB Jumpdrive and a newer Corsair 16GB Voyager.I have had the system crash when plugging in any of those i...
Being new to this, I know where VeerK got this info.I have watched several Haswell overclocking videos on YouTube and JJ from Asus always states the following:1. Dial in your overclock using manual Vcore.2. Once you have a stable overclock, set it to...
VeerK,How are you setting manual VCore?On my M6E I see two ways to set it that can be construed as manual.1. Fully Manual Mode - EnabledI have this enabled and just punch in my voltage in the CPU Core Voltage. I have never seen the voltage drop while...
jaymison13 wrote:realbench doesn't show cpu usage anymore. how do I fix that?You can try rebuilding the performance monitor registry strings.Open a command prompt and type lodctr /R and hit enter.See if that does anything for you.Gotta say though, ev...