I'm guessing that you are talking about the 2 small fans in the heatsink over the VRM. I have Rampage VI Encore and it has the same setup.When I used Fan Expert in AI Suite it prompted me to run the fan tuner and after I ran it the two small fans ...
martine-dee wrote:That is an interesting angle worth exploring. Date-wise, my problem did start after the installed version of the microcode was produced.$ dmesg | grep microcode[ 0.000000] microcode: microcode updated early to revision 0x2000064,...
martine-dee wrote:Update: Apr 23, 2020A relation that I found and confirmed empirically over the last month is that reboot loops only happen on system restart from Unbuntu (16.04). For some reason, the system also sometimes gets stuck (for a long tim...
HiVizMan wrote:You have a good system there, and the Corsiar 1200i PSU is a very good unit indeed.Read the reviews on the 1200AXi vs the old 12000AX on Hardocp.The 1200AXii is adequate, but the old 1200AX is available still and a better PS than the n...
WhitePaw wrote:Had to try my kit just for fun..worked fine at 2133mhz, and not a massive voltage..2200mhz, then the voltage started to get too high..My first post on this forum, but a little know fact is that the IMC ON THE 3930 WILL DIE WITH Speeds ...