My problem was i had to clip rubber around connector that goes in oc panel i could not set it in at all , so with razor blade carefuly i clipped rubber of it just so much i can plug it thats only problem i had with it , as rubben was to thick on it ....
No problem glad i could help ,this board have allot options it took me some time to get it all ,j ust read up on that guide and other posts here u will get it .
Yup i got that bios is updating message my self , but i updated bios 1 hour a go i got scared ****les that bios got corrupted , but i restarted the thing and again it posted message bios is updating ,i shot it down booted and it was not showing that ...
First set that one 32 gb kit in red slots on Ai overclock tuner and select manual , Select your corect dram frequency for your kits, now go to Digi + power control and set dram current capability to 140% for both chanells and DRAM power phaze control...
Definitly overprovision , 10% is mandatory i got on my 840 pro 512 gb 20 % overprovisioned ,it keeps drive faster and last longer , if u are heavy user 15% minimum is reccomended , and set os optimization for maximum reliability to lower writes os do...