©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

The_Madhatter · 05-17-2023

Issue:Each time I plug a USB-C device into the front USB-C port (U32G2X2_C9), the following happens:- The device briefly "connects" and appears in Explorer (followed by the typical Windows "plug in hardware" chime).- Then it immediately ejects and re...

The_Madhatter · 09-27-2023

Z790 Hero here. I have the exact same problem, I have a SATA addon card that is not recognized not even in BIOS. It's like the whole slot is disabled. The card works on my old Z490 Hero board. In the BIOS settings the operating mode is set to "addon ...

The_Madhatter · 06-13-2023

It is interesting that the AMD chipset seems to be affected as well. But unfortunately I don't have an update on that. The problem still persists to this day.

The_Madhatter · 05-29-2023

@Flyingsausage87 Your problem is interesting. Fortunately, I haven't had any random disconnects after the connection is successfully established (I have only this first time hiccup). @Saltgrass I suspected that too, so I even tried unplugging the opt...

User Statistics

User Activity

Z790 Hero Front Panel USB-C connector does "one time" disconnect when new USB device is plugged in

Re: z790 hero pcie SATA card not detected

Re: Z790 Hero Front Panel USB-C connector does "one time" disconnect when new USB device i

Re: Z790 Hero Front Panel USB-C connector does "one time" disconnect when new USB device i