Hi,Can anyone please tell me how to delete or uninstall a saved overclock profile in the BIOS for a Maximus IV Extreme-Z board?I saved an overclock configuration to OC Profile 2 via the BIOS tab of "Tools --> OC Profiles" and now wish to delete or un...

Hi,I have just finished building an i7 2600k rig with Maximus IV Extreme-Z board and a clean Windows 7 64bit installation.I would like to know what is the correct sequence to install the motherboard drivers and software just in case there is a manda...

Hi,There is a sticky guide on the forum about using EZ Flash 2 to flash the 3xxx series BIOS versions into a Maximus IV Extreme-Z board but what about earlier versions such as 0902 and 1004?Can these be flashed by pressing the ROG connect button on t...

Hi,I need to use the PCIEX1_1 lane in my Maximus IV Extreme-Z motherboard for a video capture card but it is blocked off if I put my GPU card in the PCIE_X16/8_1 lane. Will I suffer any loss of GPU speed if I put the GPU card in the PCIE_X16_2 lane o...

Hi,Would anyone please be able to advise me if I should connect the PSU to only 4 pins or to 8 pins of the 12V ATX power connector on a Maximus IV Extreme-Z board? The board ships with one set of 4 pins blanked off so I wondered if I needed to remove...