I need to replace the M.2 thermal pads on my CH8, I'm looking to use either TP's from Arctic or Thermal Grizzly, but not sure what thickness I need, does anyone know?
Slightly confused if I should be using AI Suite or Armoury with my Crosshair VIII Hero. Only interested in controlling the fan speed on the Ryujin Cooler and adjusting the RGB elements for the board/GFX card and case.
I’ve recently finished building a new Asus ROG PC with a 3900X and have been experimenting with AI Suite 3 and fan curves for the Ryujin 360 but I’m not sure if it stores the fan profiles so if I choose not use it control returns to the AIO or if it ...
Idle mine are low to mid 40's, whilst gaming they max out around 60c. Do you have any airflow over the chipset, maybe increase the speed of the front intake fans assuming you have them?
Thought these were fixed in 803 with an AGESA update, can’t recall if you needed the latest AMD chipset software installed as well, but no harm in installing. *I’ve not had a single WHEA error with my build.
This is probably an issue with the game but I'm going to mention it here anyway. Recently I've been playing Anthem and with LightingService enabled I get micro-stutters in the flying sections almost like rubber banding with high latency. Disable th...
Thanks for the clarification. For now I'll leave mine as it is, Armoury handles it okay. I may switch the fans to the MB header later and let the BIOS control it. Shame you can't control the lights via the BIOS as well, at least for basic affects ...