©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

ScutuMix · 12-05-2024

Hello,I got my PG32UCDM about a week ago and since then I have kept trying to upgrade the firmware from MCM103 to 105, but every time I run the extracted "PG32UCDM FW update MCM105.exe" file I get the loading wheel on the mouse cursor for a few seco...

ScutuMix · 04-12-2024

Using GPU Tweak 3 to control GPU and Memory Mhz doesn't seem to be working. I set the Boost Clock at 2400 Mhz and Memory Clock at 20k Mhz, but looking at the Monitor Graph reading, the GPU Clock goes to over 2800 Mhz and Memory Clock at 21k Mhz - fa...

ScutuMix · 12-19-2024

It worked a few days after my first try—maybe less than 10 times I tried. But it worked after I changed the USB cable from a PCIe USB card to a USB Plug on the Montherboard, which probably was the reason it worked. So you can try a few different USB ...

ScutuMix · 12-05-2024

I was able to install the update out of nowhere, and that's because the "PG32UCDM FW update MCM105.exe" loaded the installer interface after some time (maybe a few minutes)—which didn't happen before. Something else I tried that didn't work immediate...

ScutuMix · 03-14-2012

Hi guys, I'm new on the forum an in the ROG world. I just ordered last week an ASUS G53Sx customized on XoticPC.com website and I would like to know if the new models of G53Sx still have this problem with the CPU.a) How can I test the laptop to see i...

User Statistics

User Activity

PG32UCDM - can't install MCM 105 Firmware

GPU Tweak III - Settings Don't Apply?!

Re: PG32UCDM - can't install MCM 105 Firmware

Re: PG32UCDM - can't install MCM 105 Firmware

Re: ATTENTION: G73/G74/53SW/SX Owners - CPU Throttling to 798mhz and how to fix it