I realized I was still on the old 1202 bios and there had been several updates since then. I upgraded to the 1603beta a while back and with a few quick tweaks everything was performing normally.However after this 1703 update I'm experiencing some we...
Hey ROG Fam. Decided I needed to create a separate post for the crazy RAM issues I'm experiencing with my build.
So I've been get the hang of tuning the 14900ks. While leaving memory on Auto, I've managed to tune the CPU to to pass various stress tes...
I've been working on a new build for a while now and it's been nonstop headaches every step of the way. Ill try to provide as much important details as possible.
The new build consists an Z790 Apex Encore. 14900ks. Dominator Titanium 7200MT/s kit. St...
Long time no see folks!
Got this new build together and I've been riding the struggle bus trying to get a modest overclock stable.
Im honestly a bit overwhelmed with all the new settings this board has vs my previous Z590 Apex. Unfortunately it does...
Hey all. I've been looking into some clever ways that people have diffused the lighting of their LED strips in or on their cases. I know that various things well get the job done. Heck, I've even seen people say they placed wax paper over their LEDs....
Thanks! I've disabled both the CEP settings. Didn't have to do that in my previous tuning. I managed to fix the issue with coolant temps rising while working in the bios. And im no longer getting horribly low scores in Cinnebench. However I still fee...
I'll do my best to give you a hand. I've definitely gotten a better grasp of tuning 13/14th gen now. I've still got a bunch more fine tuning I can still do, but after going without a PC for so long, I just wanted to get back to playing some games and...
Thanks. And nope I haven't had any problems gaming or using the system since I resolved the issue with the contact plate and tuned the system after that! Its been running great now!
It does take a bit of tweaking to get the 14900ks temps under contro...
So, MAJOR update here. I found the source of all my stability frustrations! This whole time it was the TG Contact Plate! The V2 of the contact plate is deceptively simple compared to the precision required to properly torque down the screws on the V1...
Ok I think I may be onto something FINALLY! I came across a reddit warning not to use the new screws that come with the updated Thermal Grizzly contact frame, but to instead use the screws that came from the stock plate. And also not to tighten them ...
