Is there any way to extract just the software which controls the LED strip on the LC ProArt360 CPU heatsink? I don't want to install the Armoury Crate. Or is there an alternative software?
Is there any documentation or anyone has any recommendations on how tight, basically which torque, should be used for various screws on a motherboard?My mb: ProArt Z890, water cooler. LC ProArt 360.
I have an Asus ProArt Z890 Creator WiFi motherboard with a Core 9 Ultra 285k processor.I was using before 4 x 32 GB Crucial DDR5 5200 (2 x CT2K32G52C42U5) with success at 5200 MT/s, I never tried to overclock and I prefer to have a stable system. Bec...
I have a ProArt Z890 motherboard, it comes with a nice Q-Slide M.2 mechanism for the PCI Gen 5 drive. Can I buy additional Q-Slides? Will they work with the rest of the PCI Gen 4 M-2 slots?
I have the Asus ProArt Z890 motherboard running an Intel Core 9 Ultra 285k CPU.I would like to have 256 GB of RAM. Which model do you recommend? The new CU-DIMMs do not seem to be available yet everywhere.What it is available (nor CU DIMMs) in my are...
Unfortunately I need 128+ GB so I cannot go back to two DIMMs. If anyone maybe manages to get these running at 6400 please let other people know. They work at 6000 and I even bought Karhu RAM test to run tests and they seem to be fine at 6000.Thanks
Well, that's the problem, what exactly "without excessive force" means is different for everybody and subjective. A torque wrench is about 50 bucks and will serve for many years. Some recommendations are 0.6 Nm for components and 1 Nm for the case or...
