Hello,I looking for a new monitors for my setup.
I send back today a 2 samsunfg G7 with the same problem I thing is endemic of this panel, but I like to know If asus fixed the problem of wake up , because my problem was if the pc go to sleep or even just not go to sleep but have the intruccions to send to sleep the monitors and later try to wake the monitor with the mouse or keyboard , almos of the case never go awake and have to reset the PC. I love this size It's great for CAD .
I know than is another brand but I guess It the same panel. My problems was
Connected to 4090 asus rog oc. Through display port, it gives a native resolution of 4K and 120 Hz. If you leave the computer stopped and suspend the monitors, there is no way for them to be reactivated and you have to restart. I have already tried everything, including a 16K display port cable. If I connect it via HDMI, ok, but it only gives native resolution 4k at 60Hz whatever the cable, I have 8k HDMI 2.1 cables and there is no way to change it and if you increase it to 120 it gives random screenshots of 1 or 2 seconds, thing. unbearable while working or doing some simulation. On the other hand, I configure them and every now and then I have to configure them again, the brightness does what it wants even with the automatic brightness disabled, you remove the game mode from the image so that it is more realistic and you put it in graphic and it It changes when it comes from the soul..... I have bought the two monitors to work and I cannot be wasting more than half an hour every day in configurations or restarting the computer because I am going to have a coffee and then it does not restart, I have tried everything, canceled hibernation by code, deactivating the shutdown USB ports when it goes to sleep but with the Display port once it goes to sleep there is no way to activate the monitors again. Finally, I have chosen to try to cancel the suspension and I have only activated it to turn off the monitors after 10 minutes and if you leave it for more than 20, the monitors no longer reactivate, whatever I do, you have to hit reset or turn off the computer and come back to turn it on, and even then it misconfigures some lmonitor option, leaving them unpaired.... it's amazing how someone can sell this as a pointer. The monitors are connected by cable to the internet and have been updated to the latest firmware on their own the first time they are turned on, all the drivers are the latest and the cables are of the highest quality. my pc is a workstation with an i9 13900k, 64 GB at 6000 and the asus rog strix 4090 oc card, all with the drivers updated to the latest, I have looked for solutions or tried other options and in the forums themselves they end up saying that it is a An endemic problem with these monitors since the launch and that they have not completely solved.
