[GL553VD/FX553VD] Liquid Metal Results

[Dante_Snake]

Hi everyone so im here to bring to you my results about the liquid metal from Thermal grizzly conductonaut, the results are pretty good but not that to much, well i din''t a video, are just screenshots from windows

Here my specs from my laptop, is an FX553VD-DM056T (The Mobo is the Same as GL553VD according to CPU-Z)

i5 7300HQ
GTX 1050 4GB
16GB Ramm DDR4 2400Mhz
512GB M.2 NVME Samsung PM981
1TB 7200RPM HDD

Well here are the Screenshots, one by one im gonna tell you wich settings im using
i used aida64 with cpu Benchmark and gpu benchmark because is just one heatsink for both


1.- Thermal Paste Used(Noctua NT-H1)
(No undervolt Automatic Fans Speeds 11Min Test)



2.- Thermal Paste Used(Noctua NT-H1)
(No undervolt Just Max Fans Speeds 10 Min Test)



3.- Thermal Paste Used (Noctua NT-H1)
(Undervolt of -0.140 CPU Automatic Fans Speeds 10 Min Test)



4.- Thermal Paste Used (Noctua NT-H1)
(Undervolt -0.140+Max Fans Speeds 25Min Test)



5.- Thermal Paste Used (Liquid Metal Thermal grizzly conductonaut)
(Undervolt of -0.140+Automatic Fans Speeds 55 Min Test)






After all i din't did the Max Fans Speed to benchmark maybe would be 7º or 8ºC Less maybe, so for me the Liquid metal is good for this laptop, the laptop already has protection in the CPU and the GPU so i don't used isolate tape, i hope this post help other people, of curse this method voids your warranty, Greetings from México 🙂

[AMHX888]

Impressive work. Well done.

[mmohamed2]

Thank you for sharing

[Dante_Snake]

Thnak you, ^^ i hope this help other people.