[Big Help] GL502VSK Temperature

[Plaayer]

Hello, i need some help. I got a gl502vsk and notice a big temperature when i play, look on the forum and see alot guides about undervolt and curve on afterbune. Make all and the temperature drop from 92 to 77. Big drop, them i decide to repaste.
I buy a coolermaster gelmaker r1 and open my laptop to repaste him. When i open i see that nasty paste and clean all, and apply the new paste. Well, now i got 82-85 with this new paste. I dont understand what happ and decide to open again, think i make some **** on repaste. Them i see, its all good, nothing bad, perfect. Now i dont know what i do to resolve this, can any1 help me? I will put some photos to help the understand.


When I open, this is what i see.
https://imgur.com/eYCnzpC

Then i Clean all, and thats the result
https://imgur.com/nfYQ9RP

Then, i think i make ****, and open again to see if its all ok, and this is how look
https://imgur.com/XANyM9W


Then i realize i dont make ****, but dont understand why just a few thinks are good and anothers are not so good.
https://imgur.com/ODGRQaP


If any1 can help me, Pls.

[FULLMETALJACKET]

You can't use regular thermal paste on the VRMs. It won't fill the gap properly and they will overheat.

You have to use the stock thick paste (called K5Pro) or thermal pads. If you plan on using thermal pads, measure the gaps before buying the pads. Too thick and the heatsink won't make proper contact and pressure with the GPU/CPU dies. Too thin and they will not make proper contact.

[Plaayer]

FULLMETALJACKET7 wrote:
You can't use regular thermal paste on the VRMs. It won't fill the gap properly and they will overheat.

You have to use the stock thick paste (called K5Pro) or thermal pads. If you plan on using thermal pads, measure the gaps before buying the pads. Too thick and the heatsink won't make proper contact and pressure with the GPU/CPU dies. Too thin and they will not make proper contact.

I buy 1mm thermal pad. Its enought?

[Plaayer]

Now i have put the thermal pads, and 85° gpu and 81° cpu.

Artic 1mm. Pls help me.

[Plaayer]

Up up

[Tor_Spo]

Plaayer wrote:
Now i have put the thermal pads, and 85° gpu and 81° cpu.

Artic 1mm. Pls help me.

use liquid metal like real men and see the laptop die or perform to the fullest!

[elang]

Plaayer wrote:
Hello, i need some help. I got a gl502vsk and notice a big temperature when i play, look on the forum and see alot guides about undervolt and curve on afterbune. Make all and the temperature drop from 92 to 77. Big drop, them i decide to repaste.
I buy a coolermaster gelmaker r1 and open my laptop to repaste him. When i open i see that nasty paste and clean all, and apply the new paste. Well, now i got 82-85 with this new paste. I dont understand what happ and decide to open again, think i make some **** on repaste. Them i see, its all good, nothing bad, perfect. Now i dont know what i do to resolve this, can any1 help me? I will put some photos to help the understand.


When I open, this is what i see.
https://imgur.com/eYCnzpC

Then i Clean all, and thats the result
https://imgur.com/nfYQ9RP

Then, i think i make ****, and open again to see if its all ok, and this is how look
https://imgur.com/XANyM9W


Then i realize i dont make ****, but dont understand why just a few thinks are good and anothers are not so good.
https://imgur.com/ODGRQaP


If any1 can help me, Pls.

Fun fact: https://topclassactions.com/lawsuit-settlements/consumer-products/electronics/906954-asus-laptop-cla...
This issue was covered by a class action settlement that has since came and gone. Perhaps Asus might accommodate you with a repair/resolution out of warranty considering you're trying to fix a documented design flaw by reapplying thermal paste.

[FULLMETALJACKET]

85C/81C is fine.
You can undervolt the CPU and GPU to improve that.