cancel
Showing results for 
Search instead for 
Did you mean: 

PG27AQDP OLED Anti-Flicker always greyed out/disabled

Freemzz
Level 7

So OLED Anti-Flicker is always greyed out and there is no way to enable it. I updated FW to the latest version but it still doesn't work. Tried to switch to DP and still no luck.

Here are base setting:

FW Version: MCM103

Variable Refresh Rate: Enabled

Uniform Brightness: Disabled

DSC Support: Disabled

Input: HDMI

HDR: OFF

Game Visual: Racing Mode

Any tips how to enable Anti-Flicker?

457 Views
7 REPLIES 7

Nate152
Moderator

Hello Freemzz

Open the monitor OSD, scroll to System Setup, Power Setting, check Performance mode is selected.

Then check if the OLED Anti-Flicker feature can be selected.

 

 

 

Hi @Nate152 

Power Setting is set to Performance Mode.

OLED Anti-Flicker is still greyed out.

 

Nate152
Moderator

Ok, thank you.

Try turning on HDR, then check if you can select the OLED Anti-Flicker feature.

 

 

 

Freemzz
Level 7

I enabled HDR on Windows 10 via Display Setting > Use HR >On.

OLED Anti-Flicker is greyed out.

 

I also downgraded FW to MCM102, set same settings from my initial post message including Power Setting set to Performance Mode, tried HDR on and off.

OLED Anti-Flicker was greyed out.

 

Thereafter upgraded back to MCM103.

OLED Anti-Flicker is greyed out.

 

All updates I did via One Key Update.

ASUS_PG27AQDP_FW_MCM103_and_OneKey_Update_SOP

ASUS_PG27AQDP_FW_MCM102_and_OneKeyUpdate_SOP

 

Nate152
Moderator

I'm not sure why the OLED Anti-Flicker option would be greyed out.

Maybe try a lower refresh rate?

You could try resetting the monitor settings.

Open the monitor OSD, System Setup, scroll to "All Reset" and select Yes.

 

 

 

I tried to reduce refresh rate to 60 fps, reset All Settings. Still doesn't work 😞

I have another OLED monitor PG27AQDM and OLED Anti-Flicker works just fine.

Perhapds a bug in FW on PG27AQDP?

I guess I will wait maybe in next FW version it is fixed or something.

Nate152
Moderator

Ok, I found the issue.

It seems the Anti-Flicker feature can only enabled when setting the refresh rate to 240Hz and the resolution to 1080p or 1440p.

pg27aqpd.png