NEED MCM103 FOR PG27AQDM

[ns35]

Hello, can you add again MCM103 to firmware page for pg27aqdm? I need it. Thank you.

[Silent_Scone]

Would appear this version is NLA from the support site. Can I ask why you want this revision? Have 107 here and it's been brilliant for me.

[ns35]

Hi, i have mcm107 now, and using sdr mode. My problems:

-Color saturation problem. It is too much than mcm103.

-Screen saver mode is not working properly. Mcm103 is the best for this mode.

-mcm107 gamma 2.2 is darker than mcm103. Because of this i am using gamma 2.0 now. But it is not fine for me again.

In summary, mcm103 is the best for me, i am happy with it.

[Silent_Scone]

Some of this is certainly preference. I'm running some digital vibrance in SDR on 107. Are you able to demonstrate screensaver not working on MCM107?

[ns35]

I returned to mcm103. Because of this, i could not send the difference about screen saver but you can see the problem on this link:

https://rog-forum.asus.com/t5/gaming-monitors/asus-pg27aqdm-firmware-update-mcm104-causing-screen-sa...

This problem continues. Mcm103 does not have this problem. After mcm103, 104,105,106,107 have this problem.

”Basically (under firmware MCM103) the Screen Saver option only dims the screen when a large part of the screen was static for too long. Since the MCM104 update it still have the same function as before but in addition it adds a permanent vignette effect which dims a bit the edges of the screen as soon as it is activated. I don't know if it's a bug or additional burn-in/image retention security though.”

[Silent_Scone]

Sorry, my above post was meant to state to take a video to confirm behaviour. I'm not seeing this on my panel.

[ns35]

https://rog-forum.asus.com/t5/gaming-monitors/asus-pg27aqdm-firmware-update-mcm104-causing-screen-sa...

This problem continues. Mcm103 does not have this problem. After mcm103, 104,105,106,107 have this problem.

[ns35]

Thank you so much 🫶