HELP: PG27AQDM screen strange after firmware update

[Crasje]

Hi,

I updated my firmware on my PG34 and PG27. the PG34 went smoothly but the PG27 has a weird screen now. 

1. the light below the montitor is off

2. when I take a screenshot of the sceen it looks normal

 When I take a picture of my screen it looks like this:

 If I press the button on the back the menu doesn't come up.

Suggestions anyone?

[Nate152 · Accepted solution]

Hello Crasje

Try turning your monitor off and on again with the button to the right of the OSD menu button.

After turning it on again, press the middle button to bring up the OSD menu, go to System Setup, scroll down and select "All Reset".

This should get rid of the funky screen. 

You can check the lighting under Lighting effect.

[Crasje]

My OSD menu only has 3 options, of which on is system setup, when I select that I only get power settings and display port stream as option 😣

My PC is off when I test that. I will try it with my PC on as well.

Update:

With my PC on, I cant open the OSD menu, I only get the option to turn the monitor on or off.

Update 2:

With my PC on I turned it on and off and voila, the OSD with all the options. I pressed All reset -> yes.  Restarted my PC and everything seems normal YAY. Thanks @Nate152 

By the way, remember all the sh*t i had with armoury crate? I figured it had to do something with my Ruyjin cooling, so when I went from full tower to midcase, I switched to the Corsair H150i. First my system is way cooler, second my Armoury crate seems stable and show all the other Rog stuff I still have. 🙂