Hello guys,
I'm quite upset as I just created a new build and my PG278Q rog swift is not getting signal. I've also pressed the buttons of the monitor to see if I could see the menu but nothing appears although a no signal symbol appears and the asus rog logo appears as well when turning it on. The monitor is connected to my GTX 980 and doesn't seem to connect properly (displaport) however if I use the hdmi and connect it to my tv there it works fine. One curious thing is that when I plug in the display port the PC (windows 7 Ultimate x64) does detect the monitor but doesn't let me select it as primary monitor or even selected as duplicated or extended display. And one last thing, when booting the computer if th displayport is connected I won't get any signal, I need to boot only with the hdmi. Any tips or should I just RMA it ? I'm tempted on buying another displayport cable to see if that's the problem I also thouhght about a driver issue with windows but haven't found much.
Thank you!
J
(build: Corsair Obsidian 350d, Gigabyte GA Z7MX G5, Corsair rev. pro 2133 8Gb RAM, Core I5 4690k, XFX PSU 850w, Zotac ref. GTX 980, PG278Q.
