cancel
Showing results for 
Search instead for 
Did you mean: 

RAM Slots Population Order?

JRd1st
Level 12
. . . or in other words, which slots are you supposed to put RAM in in order to maintain dual channel memory?

1,2 and 3, 4? 1,3 and 2,4 or . . .

Please don't tell me what you "think" or what "Asus usually does" I only want to know the facts for the G74, G73, and G53 notebooks so I can add this info to my New Drivers sticky (I'm going to have to rename that thing lol ) so there's a reference on this.

It's ridiculous that there is no hard info available on this subject...
Read the User's Manual for more info. 😄



G74SX-A1 BIOS 203
Intel 6230 WiFi/BT
LG E2350 LED LCD Monitor
Intel Series 510 120 GB SSD

Drivers, Apps and How To's
Latest nVidia Drivers

JRd1st on DeviantArt.com
32,804 Views
9 REPLIES 9

dstrakele
Level 14
http://en.wikipedia.org/wiki/Dual-channel_architecture states:

"The memory modules are installed into matching banks, which are usually color coded on the motherboard."

They even have a picture of the color-coded memory slots.

Also:

"If the motherboard has two pairs of differently colored DIMM sockets (the colors indicate which bank they belong to, bank 0 or bank 1), then one can place a matched pair of memory modules in bank 0, but a different-capacity pair of modules in bank 1, as long as they are of the same speed. Using this scheme, a pair of 1 GB memory modules in bank 0 and a pair of matched 512 MB modules in bank 1 would be acceptable for dual-channel operation."

Brody likes to tear his machine apart at the drop of a hat - maybe he can tell us if there are some markings on the slots to differentiate them into banks or channels?
G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

dstrakele wrote:
Brody likes to tear his machine apart at the drop of a hat - maybe he can tell us if there are some markings on the slots to differentiate them into banks or channels?

Lol! The only markings I've noticed are that they're numbered 1 through 4, and the three modules that come in the 12Gb configs are installed in slots 1,2,3.

My G74SX (CST1-CBIL; the Staples Canada version) came with 8GB of 1333MHz stuff (2x4GB Samsung sticks) which were in slots 1,3. My memory BW is ~14GB/s which is unachievable with a single channel config, so it must have been correctly set up for dual channel mode.
--
G74SX-CST1-CBIL, i7 2630QM 2GHz
32GB DDR3 RAM @1333MHz
GTX560M 3GB DDR5 (192 bit)
17.3" LED 1920x1080
Sentelic TP, BIOS 203
Debian Linux Wheezy (Testing) Kernel 3.2, NVIDIA 295.40

JRd1st
Level 12
That's true . . . on desktop boards but the notebook isn't like that. There's a whole thread where Chastity and others are conjecturing on this and I can't determine the "winner" lol
Read the User's Manual for more info. 😄



G74SX-A1 BIOS 203
Intel 6230 WiFi/BT
LG E2350 LED LCD Monitor
Intel Series 510 120 GB SSD

Drivers, Apps and How To's
Latest nVidia Drivers

JRd1st on DeviantArt.com

Easy check: download and burn memtest86+ (get v. 4.20 which is for Sandy Bridge) onto a CD. Boot the CD, check your bandwidth (in MB/s; typically 14000-18000 MB/s). Change the DIMMs around into slots 1,2 for example; test again. You should notice a vast difference in bandwidth in a slot combination that that does not allow the dual channel pathway to the northbridge. You should be able to quickly peg the most favorable config this way.
Probably other ways to do this (maybe a Windoze utility?), but memtest86 is old-school and tried-and-true.
--
G74SX-CST1-CBIL, i7 2630QM 2GHz
32GB DDR3 RAM @1333MHz
GTX560M 3GB DDR5 (192 bit)
17.3" LED 1920x1080
Sentelic TP, BIOS 203
Debian Linux Wheezy (Testing) Kernel 3.2, NVIDIA 295.40

dstrakele
Level 14
+1 fostert!
G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

JRd1st
Level 12
If you go by the numbers on the board, it's 1,2 and 3,4 but if you go by CPU-Z it's 1,3 and 2,4 (board 1,2 = 2 ,4 on CPU-Z) furthermore HWInfo reports 1,3 and 2,4 also, but board 1,2 = 1,3 on hwinfo! :confused:

This result is so totally Asus that I understand it, I think . . . . :confused: 1,3 and 2,4 makes sense to the motherboard and is typical Asus, but Asus named the slots 1,2 and 3,4 to be intuitive to people. I hope . . . .


Which means that CPU-Z is wrong? :confused:
Read the User's Manual for more info. 😄



G74SX-A1 BIOS 203
Intel 6230 WiFi/BT
LG E2350 LED LCD Monitor
Intel Series 510 120 GB SSD

Drivers, Apps and How To's
Latest nVidia Drivers

JRd1st on DeviantArt.com

Ok, I'm gonna guess here...since My G74SX came with 2x4GB=8GB, I will assume that ASUS put those two sticks in correctly for dual channel mode, which seemed correct because of my good BW. Now we gotta guess what the slot numbers are that those two sticks were installed in. There are 4 slots for 4 DIMMs in the G74: each "outer" slot (closer to the bottom panel) is "stacked" on top of an "inner" slot (closer to the keyboard). The two sticks were installed in either "outer" slot, leaving both "inner" slots empty for upgrades.

So, whatever ASUS is calling those two "outer" DIMM slots are a "pair" that must be both filled to open a dual channel path to the CPU. Its been a while since I looked in there, so I don't know what those slots are labelled as there: 1 and 2?
--
G74SX-CST1-CBIL, i7 2630QM 2GHz
32GB DDR3 RAM @1333MHz
GTX560M 3GB DDR5 (192 bit)
17.3" LED 1920x1080
Sentelic TP, BIOS 203
Debian Linux Wheezy (Testing) Kernel 3.2, NVIDIA 295.40

JRd1st
Level 12
Yes! 😄
Read the User's Manual for more info. 😄



G74SX-A1 BIOS 203
Intel 6230 WiFi/BT
LG E2350 LED LCD Monitor
Intel Series 510 120 GB SSD

Drivers, Apps and How To's
Latest nVidia Drivers

JRd1st on DeviantArt.com