07-21-2014 08:14 AM
07-21-2014 12:42 PM
07-21-2014 04:45 PM
07-22-2014 12:11 PM
SHADO wrote:
Have you blown out the exhaust vents with compressed air?
07-22-2014 09:06 PM
07-23-2014 12:56 AM
SHADO wrote:
From the outside, in. You should also remove the panels on the bottom giving access to the fans when you do it. Make sure you hold the fans stationary when blowing the compressed air in from the rear vents. If you don't, the air can cause the fans to spin too fast, ruining the bearings.
07-23-2014 03:19 AM
TheCoffeeMan wrote:
So the fans shouldt be spinning at all when i do this, correct?
07-23-2014 07:22 AM
SHADO wrote:
It won't hurt them if they spin some, but spinning INSANELY fast could damage the bearings.
You can get cans of compressed air at many different places.
http://www.officedepot.com/a/products/911220/Office-Depot-Brand-Cleaning-Duster-10/?cm_mmc=PLA-_-Goo...
They even have them at Walgreens (but are expensive there).
07-23-2014 08:07 AM
TheCoffeeMan wrote:
Thanks man! I live in Denmark, but i happen to have compressed air at home, should i still PM that guy considering my location?