Hi Guys,
I wanted to see if there is any way to post (pictures or video) instructions to upgrade the hard drive. I know there is a you tube video available, but the guy there pretty much just shows you how to screw the caddy rather than connecting the cable, which is the problematic piece I think. I've got the Best Buy version and came with the second bay empty. The hardware for upgrading was including, BUT the hard drive cable came loose and I have a hard time figuring out how to connect it to the board and hard drive SATA adaptor. I think we could make this easier for future users going through the same pain.
This is the You Tube Post that helped me, in case anyone needs it.
"Hi, the video is not very smart. It misses the important points. It only shows the guy screwing and unscrewing.
There are two important points:
1. To connect to the hard drive the cable you have to pull/slide the little black piece away from the hard drive head. Insert the cable and slide back the black thing to lock it.
2. On the motherboard you have to lift it and push it a little back. Insert the cable and push it down to lock the cable in place."
Thanks!!:D