- last edited on by
ROGBot
HI, i've received a brand new G752VT-T7005T a couple of days ago. During this two days i've found some little issues (dvd writer starts load randomly even if empty, usb ports sometimes refresh during copy and doing a new folder wherever i want shows up only after pressing F5) that convince me to do a fresh install (like every "G" received in the last 6 years);
Assuming that i'm running Windows on a Samsung m.2 SSD 128gb installed onto IRST controller LOCKED into RAID mode, thats what i've found:
Doing a fresh bootable media of Windows 10 update 1155 (UEFI mode) using a USB 3.0 drive (fully working) don't show up in boot selection, using a 2.0 it works.
To recognize the m.2 drive, you have to load onto your usb drive IRST drivers, used in the section of disks research; IRST provided from ASUS website crash (blue screen IRQL), but with THIS the setup will recognize SSD and will work fine.
My questions:
there's a way to modify m.2 mode that's actually locked (grey selection) in RAID mode (i have to load RAID driver to install, no way to set in AHCI)?
if i buy a new Samsung to make a RAID 0, how i can enter into a RAID section to configure it?
searching on the net, all SSD same of mine that are on sell are named "AHCI", there's something wrong if i buy it to make my RAID?
Thanks for replies.
ACTUALLY WITH 205 BIOS THERE'S NO WAY TO SET IN RAID MODE 2 SSD EVEN IF MACHINE IS ONLY IN RAID BOOT MODE (UNIQUE SELECTION POSSIBLE IN BIOS SETUP). RAID PROTOCOL IS ENABLED ONLY FOR THE IRST COMMUNICATION PORT (SSD IS NATIVE RAID/AHCI SO IS NOT A SATA DRIVE).
EDIT: MINI GUIDE FOR A FULL WORKING MACHINE WITH CLEAN INSTALL
Here's a mini guide step by step to have a fully working G752 with a clean install:
- Download from Microsoft website using this tool last ISO of Windows 10 Home x64
- Burn onto a USB 2.0 (3.0 actually doesn't be recognized from 205 BIOS) drive using rufus (select first the downloaded ISO an then select GPT partitioning)
- Download from here lastest Intel RAID driver and simply insert unzipped folder onto USB drive
- OPTIONAL: if you want to install Windows 10 PRO version instead of home, you have to insert into bootable USB, after creating it, this file "ei.cfg" in SOURCE folder (Google for ei.cfg creation)
- OPTIONAL: remove secondary HDD to avoid issue/unwanted loss of data, you can reload it when you will reach desktop for the first time, after first user shutdown
- Turn on PC pressing ESC until you see boot list, select your USB drive and go on
- Windows setup will automatically find your Windows 10 serial from UEFI bios so you will not be prompted for wich Windows version you want to install
- Arrived in disk selection setup you will see no disk attached. Select "load driver" and use the driver downloaded from previous step, wait for a while and you will se Samsung m.2 drive
- delete all partitions, hit next and setup will automatically recereate UEFI structure (because SSD already is GPT formatted)
- Proceed for the rest of installation like normal one (inserting account, wifi, etc.)
Once reached Desktop for first time, my hint is to turn notebook onto airplane mode (FN+F2 doesn't work anymore, you have to install first the app) using the button placed in wifi panel.
Proceed (if you haven't do this step before format) with the download and installation of all package (better if downloaded from a parallel PC so you don't enable Windows to download updates while downloading drivers) from ASUS website except for this three one:
- Nvidia GPU drivers here
- ASUS Spendid Utility here
- Realtek audio driver: use ASUS driver
- ASUS Sonic Suite 2 here
So if you do anything correct you will have to download this list from ASUS support page:
Reboot when prompted and at the end re-enable wifi.
SSD OPTIMIZATION:
Heres a couple of trick to optimize SSD life and speed:
- launch CMD with admin privileges and type "powercfg /h off"
- under System --> Advanced turn off Paging file by selecting it and disabling automatic mode (reboot)
- search for "defrag" select manage and disable it
- in Device manager select SSD properties and thick the selection "disable Buffer unload" (we have battery that can supply power shortage)
LAST HINT:
If you have the "Num Lock" Windows 10 issue (no Num Lock at startup) see here:
- Launch Regedit
- Navigate to: HKEY_USERS --> .DEFAULT -->Control Panel --> Keyboard
- Find "InitialKeyboardIndicators" key
- Add "+2" at the value (if you have 2147483648 type 2147483650)
- Reboot
SSD PERFORMANCE:
For people that found pathetic write speed recognized with SSD's program benchmark, it's not a driver issue or incompatibilty, if you search for the spec of MZVLV128 Samsung m.2 drive you will find that this drive can read up to 1500 MB/s and write only 150 MB/s . So the only problem found is that ASUS decided to install "crappy" entry level SSD.
EDIT 2: after release of BIOS 213 you can simply select from Chipset page wich mode you want to channel operate (AHCI or RAID) that cannot be selected in previous version. If you want to boot from a 2,5" SSD/HDD now you can select "AHCI" and Windows 10 setup now will be able to recognize SATA drive as boot device. Also we are discussing if is better leave NVMe drives with RAID protocol or re-install / convert to AHCI protocol (discussion con be found HERE )
Dr4g0n36 wrote:Hi there!
I Always disconnect "D" drive and DVD drive in order to stop Windows setup to add letters by random intelligence. Nice to read that you found a solution. Personally i've found that better IRSt drivers that don't cause BSON is 14.8.14.1063 (it is the related driver for UEFI firmware 14.6.something)
I own a ASUS G752VS. Currently with Win10 Pro but was asked to do a total wipe to revert to Home.
I'm not sure if I should be posting this here - I'm mentally drained since I've been trying to fix this for 2 full days. Please be somehow forgiving: I have a deadline, it's Xmas, I don't want to void the warranty, and don't want to lose the third non-SSD drive 😧 which has tons on backup data.
I believe I should be in the right topic, but it's really hard for me to find all info from mobile.
It's been for 2 days that I've been struggling to get a stable Win 10 reset because I had...issues and I was so desperate to let Microsoft remote assistance to "fix" my issue. WORST IDEA EVER.
Now I believe I lost the built-in Asus partitions/restore functionalities and I'm stuck with a Win 10 USB install/recover pen drive, 2 SSDs that once were in raid (not sure about their current state).
I can boot up from the USB UEFI, but I only see the 1GB "Data" partition. Which I cannot and don't want to touch.
Enabling AHCI lets me pick one of the 2 SSDs, but that's not what I want.
I would like both SSDs to be seen as C: from Windows as a single 1TB drive, as it was when I received it.
I read I should be downloading (from mobile) some drivers to use both drives in Raid0. I've read they should be in GPT and not in MBR, but I have no idea on how to check them. I remember I erased and deleted them when in AHCI during one of the Windows install attempts.
The eSupport folder is 7zipped on the 😧 (Data) 1TB non-SSD drive.
I'm close to a mental breakdown because of the terrible downward spiral a simple issue brought me at this point, and already had an anxiety attack. TMI, I know.
I'm not exactly a newbye with technology since I'm an IT engineer/programmer/developer, but when fiddling with BIOS and hardware stuff, I have very little experience.
Yet, thanks to every single update from Windows - and I'm not in the Windows Insider program anymore! - each time I apply such "stable" updates I lose days to fix everything back.
Could someone please be so merciful to help me a bit in this 59 pages thread? Pretty please? 😕
(also: did I lost all those useful hidden partitions on the SSDs? Is there a way to restore them? Without touching the mechanical 😧 drive data?)
Thanks in advance.
Sent from SM-G955F using Tapatalk
NeatWolf wrote:
Hi there!
I own a ASUS G752VS. Currently with Win10 Pro but was asked to do a total wipe to revert to Home.
I'm not sure if I should be posting this here - I'm mentally drained since I've been trying to fix this for 2 full days. Please be somehow forgiving: I have a deadline, it's Xmas, I don't want to void the warranty, and don't want to lose the third non-SSD drive 😧 which has tons on backup data.
I believe I should be in the right topic, but it's really hard for me to find all info from mobile.
It's been for 2 days that I've been struggling to get a stable Win 10 reset because I had...issues and I was so desperate to let Microsoft remote assistance to "fix" my issue. WORST IDEA EVER.
Now I believe I lost the built-in Asus partitions/restore functionalities and I'm stuck with a Win 10 USB install/recover pen drive, 2 SSDs that once were in raid (not sure about their current state).
I can boot up from the USB UEFI, but I only see the 1GB "Data" partition. Which I cannot and don't want to touch.
Enabling AHCI lets me pick one of the 2 SSDs, but that's not what I want.
I would like both SSDs to be seen as C: from Windows as a single 1TB drive, as it was when I received it.
I read I should be downloading (from mobile) some drivers to use both drives in Raid0. I've read they should be in GPT and not in MBR, but I have no idea on how to check them. I remember I erased and deleted them when in AHCI during one of the Windows install attempts.
The eSupport folder is 7zipped on the 😧 (Data) 1TB non-SSD drive.
I'm close to a mental breakdown because of the terrible downward spiral a simple issue brought me at this point, and already had an anxiety attack. TMI, I know.
I'm not exactly a newbye with technology since I'm an IT engineer/programmer/developer, but when fiddling with BIOS and hardware stuff, I have very little experience.
Yet, thanks to every single update from Windows - and I'm not in the Windows Insider program anymore! - each time I apply such "stable" updates I lose days to fix everything back.
Could someone please be so merciful to help me a bit in this 59 pages thread? Pretty please? 😕
(also: did I lost all those useful hidden partitions on the SSDs? Is there a way to restore them? Without touching the mechanical 😧 drive data?)
Thanks in advance.
Sent from SM-G955F using Tapatalk
Sorry for late reply but i'm now on MSI and i don't watch frequently ASUS forum, so:
1) if you leave AHCI enabled you will see 2 separated nvme even in Windows setup, because AHCI use intel standard driver, no manual operation needed.
2) if you want to RAID 2 SSD, first enable it in bios, reboot, re enter bios and create the "RAW" container under RTS menù (linking 2 nvme drives); in this situation the notebook will use RTS chip not Intel one, this peripheal isn't included in Windows 10 ISO's so you have to manually search for a driver.
HINT: before starting, download "f6flpy-x64-14.8.0.1042" , this is the most compatible one for G752V (you can see a semi-identical number in RTS section in bios setup) and add it to Windows 10 USB, like this screen:
Then in the disk selection screen you will have to add the correct driver that's in f6flpy folder. After a minute of "freeze" Windows setup will recognize your raid.
