G751 M.2 bracket 3d printed and heatsinked

[aeolisio]

After searching these forums for a M.2 bracket for my G751JY-DB73X G-Sync I actually made a 3d printed M.2 bracket myself. Well i made 13 versions before i found one that was perfect but its on shapeways if anyone still needs one. It has an open top for heatsinks. It also leaves enough room for the 850 EVO to fit naked. With heatsinks attached i got an average 7 degree drop in crystaldiskmark with the SM951 and 11 degrees with the stock XP941 which is a lot more then i expected.

UPDATED NEW M.2 VERSIONS
Need to drill holes yourself but the cleanest option-
http://shpws.me/J8lX
preprinted holes but wont look as clean-
http://shpws.me/JcEy
installing a drive larger than the evo 250gb in bay 1 without heatsinks-
http://shpws.me/JtUm
installing a drive larger than the evo 250gb in bay 1 with heatsinks (use another version if you can)-
http://shpws.me/J

link to all brackets
https://www.shapeways.com/shops/aeolisio

Update 2.5 cages available now
SSD cage
http://shpws.me/JMB7
Standard Cage
http://shpws.me/JMBN
Minimal Cage
http://shpws.me/JMC2

[IWLSR5]

Carnoustie wrote:
from the photo's on the last page,what type of connection does the samsung 500gb use,the only connection option I have is the same Sata connection in bay 2

That is also a SATA connection. The 500GB Samsung just has it's covers off.

[Carnoustie]

I also have 2 spare mSATA drives,I noticed on Amazon a dual mSATA to SATA adapter,has anyone tried any of the adapters?

[aeolisio]

Carnoustie wrote:
I also have 2 spare mSATA drives,I noticed on Amazon a dual mSATA to SATA adapter,has anyone tried any of the adapters?

msata uses 3.3v instead of 5v thats why msata is always lower spec than sata but with an adapter you can use msata in a sata slot. Any cheap adapter will work they are usually $5 on ebay

[Carnoustie]

thanks,8 screws and my spare drive is naked 🙂

[aeolisio]

Shapeways is offering free shipping for the next 5 days.
FREE SHIPPING On All Orders $35+ (USD) Now till August 30
If anyone needs a bracket or something else the time would be now. Any customizations like logos or names need to be submitted soon if you plan to order by the end of free shipping as itll take me a day or 2 to edit designs.

[TheWitcher]

The memory covers and cage all fit great and look nice let me know when you make anything new.

[aeolisio]

TheWitcher wrote:
The memory covers and cage all fit great and look nice let me know when you make anything new.

Im glad you like them. Ill keep you updated when i release something new.

[joshindaphils]

Asolisio,

Requesting good pics and where to get the parts for your bottom cover + heatsinks on the heatpipes. Probably best on another thread. My international warrenty is up in a few months and will be looking to replicate the drop in thermals you are seeing :D.

[aeolisio]

joshindaphils wrote:
Asolisio,

Requesting good pics and where to get the parts for your bottom cover + heatsinks on the heatpipes. Probably best on another thread. My international warrenty is up in a few months and will be looking to replicate the drop in thermals you are seeing :D.

Weeks out on it ill post some updates when i get something closer to perfect. They wont be cheap to print and i cant risk someone finding a problem i overlooked so i need to get everything just right.

[TheWitcher]

I had an idea what about a skin to cover the whole notebook? Like a cell phone cover but 3d printed and it could be open like the bracket with holes. It would protect everything from scratches and drops somewhat right. I would want that.