I have a G75 VX, and want to either add Ram to it, OR, replace the RAM already in it.
I do a lot of 3d drawings, and am hoping by adding more Ram, it might help renderings speed up etc,
Not sure if this will Improve by adding RAM??
Currently, I have 3 RAM Sticks installed.
( My understanding is that the 4th slot is hard to reach, and that I can go as high as 32g of RAM, Correct?? )
Hynix HMT35156CFR8C-PB
DDR3-1600 / PC3-12800 DDR3 SDRAM SO-DIMM 1.5 v
So either I would like to add additional 1 stick of RAM or replace originals, depends on money...sadly?
2 brands that I prefer to purchase are either Kingston or Corsair!
So, can someone give me appropriate info on exactly what is currently available for RAM, applied to both
scenarios above.
If I add 1 stick to my current RAM, which model # do I need from either Manufacturer, and can it be a 8g stick??
If I replace all, which model # would I use From either manufacturer, and yes, in this case, 8g models only.
Do I need to supply more info on this post ( Timings etc. ), and if so, what and how to I obtain it to add to it?
Thanks