I noticed that the USB 3.0 port on my G74sx is not working for any type of USB device.
I took a loot at the Device Manager within Windows 10 and I've got a yellow triangle next to "Fresco Logic xHCI (USB3) Root Hub". The driver is 3.5.97.0 and dated 02/25/2013.
Under Device Status, I have the following:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
The specified request is not a valid operation for the target device
Trying to update the driver does no good. I've gone looking for info on this and have seen other folks get frustrated as well but everything I have seen is for Windows 8.1.... and I am running Windows 10.
My Fresco Logic xHCI (USB3) Controller FL1000 Series has a driver date of 7/30/2015 and a driver version of 3.6.8.0.
I've gone looking for newer root hub drivers but have either found sites in Cyrillic, sites that want me to load their driver search software or sites with old drivers.
Threads via Microsoft have OP running in circles with doing diagnostics and updating - which I have done to no avail (and did not need a MS admin to tell me to do).
I realize that the G74SX is a 4 year old system but surely there's folks out here that have found this problem and conquered it?
I am not running AICharger. Bluetooth is not running (in fact, I could never get it to run). I saw mentions of a reg patch but that didn't help.
Any advice is appreciated.
Thanks!
Chris
