G74SX 192 BIT GPU Overclocking Tread

[Boosted_R]

My scores 3Dmark11, Driver Version 280.26, did not use ThrottleStop (doesn't work for some reason):

Stock Max 62*C During Test:

NVIDIA GeForce GTX 560M video card benchmark result - Intel Core i7-2630QM Processor,ASUSTeK Compute...

OC 920/1840/1625 Max 65*C During Test:

NVIDIA GeForce GTX 560M video card benchmark result - Intel Core i7-2630QM Processor,ASUSTeK Compute...

Never Overclocked anything before, MSI afterburner made it super easy

Running lower, same or higher settings, please post. Thanks

--------------------------------------------------------------------------------------
(Used OC settings from other site, which they say run good 24/7)

(If your running 128 bit (2GB 560M) please make a new tread)

[Chastity]

MSI Afterburner has limits in its overclocking. Thus the reason I use NVIDIA Inspector.

[Boosted_R]

Chastity wrote:
MSI Afterburner has limits in its overclocking. Thus the reason I use NVIDIA Inspector.

Sounds good, post some scores and setting 😄

Thanks

[Chastity]

http://3dmark.com/3dm11/1602823 952/1710

http://3dmark.com/3dmv/3327882 945/1683

[Boosted_R]

Chastity wrote:
http://3dmark.com/3dm11/1602823 952/1710

http://3dmark.com/3dmv/3327882 945/1683

Would have though you would have gotten more performance with the ram upgrade

Ran 930 setting: P2648

http://3dmark.com/3dm11/1755039
----------------------------------------------------------------------

Only during 3Dmark11 at 950 setting i got a message saying Driver none responsive, recovered successfully, could it be the driver, or clocking is too high for this driver ?

What driver are you using?

Did you get Throttle Stop to run on your G74SX ? if so how?

Thanks

[Chastity]

Boosted_R wrote:
Would have though you would have gotten more performance with the ram upgrade

Ran 930 setting: P2648

http://3dmark.com/3dm11/1755039
----------------------------------------------------------------------

Only during 3Dmark11 at 950 setting i got a message saying Driver none responsive, recovered successfully, could it be the driver, or clocking is too high for this driver ?

What driver are you using?

Did you get Throttle Stop to run on your G74SX ? if so how?

Thanks

I wrote a thread in the stickies on how to setup TS to work 🙂

[Retired]

Nice scores. Chas, what are your stable clocks for the G74 that'll be safe to use most of the time?

[Chastity]

Croesus wrote:
Nice scores. Chas, what are your stable clocks for the G74 that'll be safe to use most of the time?

I was able to run DA2 with the 945 settings, some games needed 940.

[Retired]

Hi Guys
ASUS G74SX-91237Z 17,3"/ 3D/ i7-2670QM/ 16G/ 2x500G7/ BluRayRW/ GTX560M/3GB / Nvidia driver 285.62

I am using MSI Afterburnner 940 / 1880 / 1625, and AIDA 64 to overwatch all values on my Keyboard LCD (CPU %- Mhz - RPM(VENT) - TEMPERATURE - Voltage; MEM %-Mhz; GPU % - core - shader - memory - TEMPERATURE - Voltage;

And this is what I get: P2725 3DMARK 11
http://3dmark.com/3dm11/2102956

Running BF3 FullHD with max settings I get arround 25-30fps ingame/online CPU TEMP is arround 66C-70C; GPU is arround 58C-62C. Talking to Asus support, they told me anything under 85C for the GPU would be fine. Anything arround 90C wouldnt be good ,O))) Would wonder when the notebook shut´s down automaticly.

[dstrakele]

Ontheplanet wrote:
Would wonder when the notebook shut´s down automaticly.

That'd be when the flames melt through the ribbon cables in your system. ;>{)> Seriously, I THINK, but am not sure, it would be when the CPU or GPU maximum operating temperature (110 or 100 C) is reached.