I had my G53SX in for repair due to the power pin breaking. The people at the repair centre changed motherboard. When I got the laptop back the fans were running way too fast so I downloaded speedfan and speccy to check my temperature. Idle temp was between 60-70 degrees C and when running prime95 it went up to 100 and throttle (multipliers going down to 8 wich resulted in a ~800mhz core speed) so I imediatly sent it back to the repair centre for them to fix it properly.
Got it back today, and since they messed up the first time, i want to make sure my temps are now normal.
Idle temp: ~50 degrees C
When running prime95: ~85 degrees C
What worries me a bit is the multipliers. When in idle the multipliers are at 30, but under load they start dropping down to 24-25. This is running on the "high performance" setting in asus Power4Gear. I also noted that worm air is only comming out of the left fan. Is this normal or will I need to send my laptop back for another "repair"?
