cancel
Showing results for 
Search instead for 
Did you mean: 

ASUS G750JX / OSX Mavericks INSTALL GUIDE

Bozzified
Level 7
ASUS Statement: Please note this activity voids the Apple EULA you agree to on purchasing the software. ASUS does not endorse this activity in any way. However, beyond buying an ASUS laptop and software pre-installed, ASUS does not dictate what end-users do with their notebooks. Equally, ASUS does not make any specific component choices for OS', or provide warranty or support beyond those shipped with its notebooks. No ASUS rep will comment here. If legal objections are raised it is liable to be removed at any time and without notice.

Secondly: any piracy discussion whatsoever will result in a ban. End of.



NEW INSTRUCTIONS FOR 10.9.2:
I posted new instructions and all the stuff you need for 10.9.2 pretty much vanilla install here
http://rog.asus.com/forum/showthread.php?39406-ASUS-G750JX-OSX-Mavericks-INSTALL-GUIDE/page20

PREFACE:

This is not 100% final installation as I'm still working with audio and wireless radios and I'm trying to get the Chameleon bootloader to show up from the BIOS when I boot so I don't have to use USB stick to get boot loader.
THIS IS FIXED and working - SEE UPDATE

A great thing about installing on ASUS G750JX is that almost all things that were in previous installation guides here on TonyMac forums under Laptop Mountain lion support > G750JX are unnecessary. This is as close to vanilla installation as I could get.

Touchpad also works. You will however need to hook up ethernet cable to laptop so you have ethernet until I figure out how to get wireless radios working.

One thing to note is that you will need to have on one of the hard drives Windows 8 installed and on that installation of Windows 8 you will need to download some kind of NFS+ support for Windows 8 (I use bundle from Paragon with NFS+ and NTFS support so I can have NTFS support in OSX and NFS+ in Windows 😎 but I think since that's a paid product you can use anything else that will just read NFS+ partitions in Windows 8.

ASUS G750JX I have flashed a bios 208

So without much writing here's what I did.

BIOS SETTINGS
go to ADVANCED and disable VT-d
go to BOOT and disable Fast Boot
Underneath Fast Boot, enable Launch CSM
You should now see a new option: Launch PXE OpROM policy. Enable this option. This allows your computer to boot via Legacy BIOS not UEFI.

INSTALLATION:

Standard Unibeast preparation:

1. On a mac download the Mavericks installation from App Store
2. Follow the steps for Unibeast and create a USB stick - Select Laptop support in addition to OSX 10.9 Mavericks App Store install
3. Once you have created and finished Unibeast USB stick preparation make sure you download the patched 10.9 kernel from step 13 and replace the mach_kernel on the USB stick with the one you download (you might have to show all files in OSX you are working on to see mach_kernel file on the root of USB drive), put the USB stick into your ASUS 750JX and boot from it
4. On bootloader screen, pick Unibeast Installer (no flags needed) and hit enter
5. It will take a bit, so be patient and OSX installer will show up
6. Go to Disk Utility > Do the standard Create Partition on a second drive > Make it GUID Partition > MacOS Extended Journaled and call it Mavericks
7. Exit Disk Utility and continue with installation



8. Once the installation finishes you will get a message how OSX Mavericks can't set the startup disc. This is FINE! Don't worry.
9. Now, restart and boot back into Windows 8
10. Install in Windows 8 NFS+ support
11. Restart and boot again into Windows 8
12. Once you have booted into Windows 8 now you should see the Mavericks volume and all the files there
13. Download this patched kernel (UPDATE: this is now recommended patched kernel by RehabMan: http://www.tonymacx86.com/mavericks-laptop-support/114677-haswell-early-reboot-mavericks-locked-msrs... ) as it allows Sleep and UseKernelCache to work properly (OLD one - do not use this unless you have problems with RehabMan's http://www.osx86.net/files/file/3631-kernel-os-x-mavericks-109-amd/ )
14. Open Mavericks volume in Explorer and overwrite mach_kernel with the one you downloaded
15. Restart and boot from the USB stick
16. Pick OSX Mavericks HDD volume and hit enter
17. OSX Mavericks will welcome you with the setup screen - follow through on standard process (iCloud might give you a funky message but that's not a big deal)



18. Welcome to OSX Mavericks on ASUS G750JX! 🙂





UPDATE:

Once you install the Mavericks you want to run the latest Multibeast 6.0 (see TonyMac) before the restart.

What you will be installing is the following:



The idea here is to have Chameleon and everything else installed into S/L/E, modify the SMBIOS.plist and have local hdd Extra folder.

If you are going to use Clover as boot see install notes in the post later in this thread so you can take out USB stick booting completely and adjust some location of some kexts and how to use the config file I included in the files.

Thanks to PeanutButterSpice and slayer2333 from TonyMac forums for trying as well on this and giving me ideas on what to do to get this working without it I would have probably not been able to look at the right place to make this work.


UPDATE 01:

Got audio and wifi working fine now!

The trick was that ASUS G750JX is using Broadcom chip.. in order to to make it recognized in Mavericks you have to update the IDs in the IO80211Family kext.. You go in and go into Plugins and update the IDs inside AirPortBrcm4360.kext > info.plist to include the following:

pci14e4,43b1
pci14e4,4331
pci14e4,4353
pci14e4,432b

Adding these will enable your Wifi.

The audio is working with VoodooHDA 2.84.

The problem I'm having is with hardware acceleration on GTX770M.. the card it properly recognized and working just fine but when I play videos HTML5 or Flash it doesn't matter it crashes it.. I can watch videos just fine if I disable hardware acceleration in Flash but H.264 HTML5 videos will not work for some reason.

Suggestions are welcome!

CUDA installs fine though.

UPDATE 2:

And I finally solved the last issue with hardware acceleration. I changed the System Definition to Mac Pro 5.1 and now everything works great.


The only last thing that remains is to get BIOS to recognize the SSD with the OSX Mavericks installation so I can boot without the USB stick boot loader. But that's really a minor issue.

Amazing! This ASUS G750JX is now an OSX Mavericks BEAST!


UPDATE 3:

The loading without the USB stick has been resolved now. I am using Clover. I will write up the guide for this as I'm still fine tuning things.

UPDATE 4:

I have used RehabMan's patched kernel (here: http://www.tonymacx86.com/mavericks-laptop-support/114677-haswell-early-reboot-mavericks-locked-msrs...) and indeed things are working MUCH better. UseKernelCache is working and I have increased my boot times now to desktop in about 10 secs instead of 30+. One side effect is that I don't see USB 3.0 recognized after installing GenericXHCI kext. Looking into this.

UPDATE 5:

Bluetooth 4.0 is now working as well. You have to enable the ASUS G750JX broadcom bluetooth IDs in BroadcomBluetoothTransport kext. We are fortunate because the Bluetooth in this laptop is BCM4352 so it's compatible fully with OSX Mavericks.

To enable go:
0. Find the IOBluetoothFamily.kext in S/L/E and copy it to desktop
1. Show Package Contents on it
2. Go into Plugins and show package on BroadcomBluetoothTransport
3. Open info.plist file and locate this entry:

Broadcom2045FamilyUSBBluetoothHCIController_P

CFBundleIdentifier
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
IOClass
BroadcomBluetoothHostControllerUSBTransport
IOProviderClass
IOUSBDevice
idProduct
33293
idVendor
1452


4. Right above this entry and after

IOKitPersonalities


(So in between those put the following)

Broadcom2046FamilyUSBBluetoothHCIController_3404

CFBundleIdentifier
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
IOClass
BroadcomBluetoothHostControllerUSBTransport
IOProviderClass
IOUSBDevice
LMPLoggingEnabled

idProduct
13316
idVendor
5075



5. This is it, SAVE and use Kext Wizard or similar to install and overwrite the existing IOBluetoothFamily.kext in S/L/E

6. Reboot and voila.. You have Bluetooth 4.0


NEW INSTRUCTIONS FOR 10.9.2:
I posted new instructions and all the stuff you need for 10.9.2 pretty much vanilla install here
http://rog.asus.com/forum/showthread.php?39406-ASUS-G750JX-OSX-Mavericks-INSTALL-GUIDE/page20
704 Views
893 REPLIES 893

AAndrei
Level 8
Do not attempt to disable integrated graphics card. You could get your system unusable.

pcfr33k
Level 8
@Areosjc,

I know your real busy but when you get a chance could you look over post 477 regarding a couple dsdt edits.


http://rog.asus.com/forum/showthread.php?39406-ASUS-G750JX-OSX-Mavericks-INSTALL-GUIDE&p=426565&view...

Thanks

pcfr33k
Level 8

I've prepared my USB stick with unibeast, replaced the mach_kernel um usb root and booted on...
Unfortunately my Asus G750JM stucks on apple logo spinning wheel...

I don't know more what to do, i think the problem can be on my mach_kernel file...

Please help!

optimus? what is your hardware?
not got much to go on here.
ideally patch your own kernel or at least check that the kernel matches the version you are loading (10.0, 10.4 etc).

if you are looking at a spinning wheel you're not doing it right.
you must boot with -v option. video the startup with a camera and post a screen shot of the state when/if fails.
otherwise no one can help.
Asus G750JX-CV050H||GTX770M||24GB ram||120hz 3D screen||
1TB Samsung 840 EVO SSD||500GB Crucial M4 SSD||500GB Crucial M4 SSD in DVD Bay
free bag and mouse :cool:
win 8.1||win 7||win xp||server 2008||os x mavericks||linux mint 16

us18x
Level 7
I am very tempted to instal Mavericks, I have to spare a HD for the sake of that. Thanks for the great tutorial!

AAndrei
Level 8
I have multiple ODD Caddies with HDD/SSD mounted inside them and I hot swap them to boot different OS-es. I have a separate caddy with a SSD for MacOS only. When I start my computer, I press ESC key until boot selection comes up and I just select the MacOS SDD to let Clover load.

This is how I roll. Caddies bought from ebay for $6 each, HDDs/SSDs of small capacities bought for easy testing for some ridiculous low prices.


AAndrei
Level 8
I have multiple ODD Caddies with HDD/SSD mounted inside them and I hot swap them to boot different OS-es. I have a separate caddy with a SSD for MacOS only. When I start my computer, I press ESC key until boot selection comes up and I just select the MacOS SDD to let Clover load.

This is how I roll. Caddies bought from ebay for $6 each, HDDs/SSDs of small capacities bought for easy testing for some ridiculous low prices.


AAndrei wrote:
I have multiple ODD Caddies with HDD/SSD mounted inside them and I hot swap them to boot different OS-es. I have a separate caddy with a SSD for MacOS only. When I start my computer, I press ESC key until boot selection comes up and I just select the MacOS SDD to let Clover load.

This is how I roll. Caddies bought from ebay for $6 each, HDDs/SSDs of small capacities bought for easy testing for some ridiculous low prices.




Can you please post a link or something to the caddy model you're using? I was thinking of doing the same thing but wasn't sure which one would work for me. I've got a g750jw.

AAndrei
Level 8
I tried to install Nvidia Web Drivers, but seems I have an issue with a black screen/no laptop display if my system definition is that of a MacBook Pro Retina. HDMI output seems to work fine.
Also, other system definitions like iMac or MacPro seems to be working just fine.
Any ideea why this fails with my laptop display?