ASUS 751JT Temperature Results After Repaste

[Halil]

I repasted with Noctua NT-H1 and Thermal Pads From Arctic 1mm and 1.5mm.
GPU Temperature is Normal but how about CPU ? is This Normal or should i Repaste again ?
5 Minute 31 Second 100% CPU (4750HQ) and 100% GPU (970M),

[Gps3dx]

Halil wrote:
I repasted with Noctua NT-H1 and Thermal Pads From Arctic 1mm and 1.5mm.
GPU Temperature is Normal but how about CPU ? is This Normal or should i Repaste again ?
5 Minute 31 Second 100% CPU (4750HQ) and 100% GPU (970M),

you'll be better off doing the "intake mod" - for me it did and still does wonders for lowering temps ~15-20.
can you explain how much paste you used and what did you re-paste ? which paste is it ? what about the mem chips of the gpu ?
did you removed previous oem pads ?

[Halil]

Gps3dx wrote:
you'll be better off doing the "intake mod" - for me it did and still does wonders for lowering temps ~15-20.
can you explain how much paste you used and what did you re-paste ? which paste is it ? what about the mem chips of the gpu ?
did you removed previous oem pads ?

Bro I Used Noctua NT-H1 for GPU and CPU about OEM Pads THERE IS NO PAD before they used on mem chips thermal paste too !! which IS hard to remove from mem chips. I USED Vrams
I bought ARCTIC Thermal Pad 1mm for Mem Chips and other parts i used 1.5mm ( ARCTIC again ) about intake mod man how can i cut the case ? if this is easy i can repaste again and cut the case