10-13-2017
02:45 PM
- last edited on
03-06-2024
08:01 PM
by
ROGBot
10-17-2017 07:30 AM
10-18-2017 12:13 PM
spartan_hoplite wrote:
So now you can run H1Z1, and PLAYERUNKNOWN'S BATTLEGROUNDS with 100% power limit? Congratz man.
10-23-2017 12:55 PM
06-29-2018 12:48 AM
evantangcd wrote:
Provious:
I've tested 1080ti on my G20CB which has H170 (mother board). When I just unplug the 230w power supply, the gpu fan did span a little and then shutdown, seems it does not have enough power to boot up, that might be the fact to prove the mother board share some power with GPU. But also I used furmark and 3d mark to run my card with 100% power limit, nothing goes wrong, and GTV5 works without under power issue, but not with H1Z1, and PLAYERUNKNOWN'S BATTLEGROUNDS. It suddenly shutdown when I start to go around to find things in h1z1. It will be fine if setting the power limit to 90%, cuz I added extra ssd which might require additional wattage, usually 90-92% is fine. It's just so strange that it passed the fire strike ultra in 100% power limit , and after testing, i checked the data, the GPU load is 99% most of the time, and 3 peaks at 100% load. by the way all the fgames running under 1080p is more satable than under 4k.
Now:
Last time. my card has issues on running some "thirsty" games under 4k, I set the TDP limit for the card to 90% to solve the issue. But then I kind of get a estimation of the wattage of the whole computer, it's definately under 410w. Thus I did some experiment on the power jumper, Fotunitely, The 1080ti can run with full power on CB. The flowing image shown how I move the jumper. I guess, by doing so , the motherboard and graphic card are sharing the whole 410w. The PC can be boot up by plug one of the power supply in either hole! wow
I've tested my computer for about 1 month, no crash on any game under 4k , no any under power issue when running Mark3d 4k tests, and furmark. I think I've done with my G20CB, at least for now. Put the computer case back on, and enjoy it ! next step for me is the cooling system. You guys can try it as well, but im not responsible for this. By the way the DELL thing is not as good as the factory power supply.
The image of jumpers are below
06-29-2018 09:32 AM
10-11-2018 06:01 PM